Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Canarsie
If you live in Canarsie, you probably already know your chimney takes more weather than most of Brooklyn. The bay is right there, the wind crosses the water, and the older brick on these houses shows it. We’re chimney specialists who work this trade and nothing else, and we’re the team to call when mortar is crumbling or a crown has cracked. Our technicians have up to 10 years of experience, and we bring professional-grade materials like HeatShield and DuraFlex to every job. Call (833) 858-5823 and we’ll set up a written estimate.
Why Canarsie Homeowners Call Chimney Sweep Crown Heights for Chimney Repair
Canarsie is a neighborhood of low-rise, owner-occupied homes, many of them detached or semi-detached single- and two-family houses built between the 1920s and 1960s. That means most of the chimney work here is residential wood-burning and oil or gas flue maintenance, not the high-rise and boiler work you find across the rest of Brooklyn. It’s a different job, and it calls for a different kind of specialist.
We work only in the chimney and fireplace trade. Every tool and every material is picked for flue work, and we run the full arc in one call: sweep, inspect, repair, and upgrade. Our HeatShield-equipped systems and DuraFlex liner technology are built specifically for masonry flues, not adapted from general contracting.
The other reason people in Canarsie call us back is the evidence. Nothing gets recommended without a camera inspection you can see for yourself, and a photo report goes with it. The local pro we connect you with is licensed and insured as the state requires, and the price you agree to is set per job by the written estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Canarsie
Canarsie’s bay-facing chimneys take salt spray whenever a nor’easter rolls through, and that exposure is why exterior brick and crowns here wear years faster than inland Brooklyn’s. It’s also why a routine cleaning often turns into repointing and flashing work. Here’s what we handle.
Mortar Repointing
Crumbled mortar joints let water straight into the brick core, and once it freezes the damage compounds. Repointing is the fix: we grind out the failing joints and pack them with fresh mortar matched to the chimney’s existing look. On Canarsie’s older brick homes, this is one of the most common repairs we’re asked to do.

Spalling Brick Repair
Spalling shows as brick faces that have popped, flaked, or gone chalky white. It’s the signature of freeze-thaw cycles combined with salt air, and it’s the one problem Canarsie chimneys deal with more than almost any other repair we quote. We replace the damaged units rather than patching over them, then waterproof the exterior so the cycle slows down.

Chimney Waterproofing
Coastal humidity and salt air eat at brick, so a breathable waterproofing coat matters here. It keeps driven rain out while letting moisture that’s already inside the masonry escape. That’s not cosmetic work on a house near the water.

Flashing Repair
Flashing is the metal where your chimney meets the roof, and it’s the first seam nor’easter wind-driven rain finds. When it’s loose, rusted, or improperly sealed, water tracks down into the ceiling and around the flue. We repair and reseal flashing as part of chimney repair, because a leak at that seam undoes everything else you’ve done to the stack.
We also rebuild chimneys and handle tuckpointing for stacks that have lost too much masonry to repair piecemeal. If you want the full picture of how we approach this work, see our chimney repair page.
Trusted Brands We Service in Canarsie
If your chimney or fireplace already has parts from a name you recognize, we work with them. We’re trained on Famco, Copperfield, DuraFlex, HeatShield, Gelco, and Olympia Chimney, and we source materials from that professional roster rather than substituting whatever’s on hand at a general building supplier. We don’t keep parts in stock, so if a repair needs a specific component it gets ordered, and we’ll tell you the turnaround up front. HeatShield ceramic repair systems and DuraFlex flexible liners are the two we reach for most on Canarsie’s aging masonry flues, because they’re engineered for the inside of a chimney and nothing else.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Canarsie Homes
- Cracked crowns nobody noticed. The crown is the concrete cap on top of the stack, and a hairline crack there funnels water into the flue. Cleaning-only visits miss it when nobody inspects the crown, so we start with the camera.
- Deteriorated clay-tile liners. Many Canarsie homes from the 1920s through the 1960s still have original clay tile, and decades of creosote and moisture can reach the surrounding masonry. A flue that’s unlined or shot needs checking before the next fire, not after.
- Spalling mistaken for cosmetic. White chalky brick on a bay-facing chimney isn’t surface staining. It’s freeze-thaw and salt damage, and it needs repointing and waterproofing or it keeps getting worse.
- Leaking flashing at the roofline. Storm-driven rain finds the flashing seam first. Stains on the ceiling or around the chimney chase usually trace back there.
Pricing for Chimney Repair in Canarsie, NY
Here’s what chimney repair in Canarsie typically runs, so you have real numbers before anyone steps on the roof. A typical mortar repointing job on a residential chimney runs $350-$1,200 depending on how many joints are involved. Spalling brick repair usually comes in around $30-$60 per brick replaced, plus the repointing around them. Crown repair or rebuild falls between $400-$1,500. Flashing repair typically runs $300-$800, and a full chimney rebuild starts around $1,800 and goes up from there. Exterior waterproofing is usually $250-$600.
Those are estimates for the Canarsie market, and the written estimate sets your final price. We don’t upsell liner or masonry work, and if a repair can safely wait, we’ll say so. Call (833) 858-5823 for a free estimate.
We Also Serve Cities Near Canarsie
Serving Canarsie puts us close to the surrounding neighborhoods as well. We also work in East New York, Brownsville, East Flatbush, and Flatlands, and the brick stock and bay exposure are similar across all of them. If you’re on the other side of one of those lines, call and we’ll sort out the details.
Serving Canarsie, NY – Our Local Coverage Area
We serve Canarsie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Canarsie
You need a repair, not just a cleaning. That white chalky bloom is efflorescence, and it means water is moving through the masonry and depositing salts on the surface. A brush won’t fix the source, which is usually failing mortar joints or a cracked crown letting moisture in. Call (833) 858-5823 and we’ll inspect it and show you what’s going on, with an estimate that’s free.
You can’t tell by looking from the firebox, so a camera inspection is the only honest answer. Original clay tiles from that era can be cracked, offset at the joints, or missing entirely in sections, and creosote and moisture can then reach the surrounding masonry. We run a Level 2 inspection with a camera and show you the footage before recommending anything. Call (833) 858-5823 to book one.
Salt-laden bay air and nor’easter wind-driven rain are hard on crowns, and this is one reason Canarsie chimneys see crown failure years ahead of inland Brooklyn. The salt and moisture work into small cracks, freeze, and widen them. A correctly built crown with a proper overhang sheds water instead of trapping it. Call (833) 858-5823 for an estimate on a rebuild.
Have the flashing and the crown checked first, since those are where storm-driven rain gets in. The flashing where the chimney meets the roof is usually the first seam to fail, followed by a hairline crack in the crown. Both show up on a camera inspection, and water stains are a real symptom worth chasing rather than watching. Call (833) 858-5823 for a free estimate.
No. Third-degree creosote is a glazed, hardened layer that fuses to the flue, and a standard brush won’t take it off. It needs chemical treatment or in some cases relining, and it’s the stage where a sweep turns into a repair. Cold winters and heavy fireplace use drive creosote buildup here, so pre-season checks matter. Call (833) 858-5823 to schedule one.
Written by the team at Chimney Sweep Crown Heights.