Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Crown Heights Homeowners
A chimney inspection in Crown Heights is a documented safety check of your flue, firebox, cap and all the masonry between them, and it’s the only way to know whether what you’re burning is venting safely out of the house. Most Crown Heights homes are older rowhouses and brownstones, and a lot of those chimneys have been quietly modified over the decades: a gas boiler tied into an old flue, a liner that was never installed, crown mortar that has softened through many freeze-thaw cycles. You can’t see any of that from the living room.

Our technicians have up to 10 years of experience, and inspections are what we do all day, every day. We work only in the chimney and fireplace trade, so the findings we hand you come from someone who looks at flues for a living. We answer 24/7 at (833) 858-5823, and same-day appointments are often available. Every inspection comes with camera evidence and a photo report, so you see exactly what we see before anyone recommends a dollar of work.
What Our Chimney Inspection Service Includes
An inspection is not one thing. The scope depends on what’s happening with your chimney and why you’re calling, and the standards we follow sort the work into levels. Here’s what each one actually means.
Level 1 Inspection
A Level 1 inspection is the basic visual check you get with a routine sweep, covering all readily accessible parts of the chimney and venting. It’s the right call when your chimney is in regular use, hasn’t changed, and you just want confirmation that it’s still sound. We check the firebox, damper, flue interior as far as we can see, the cap and the visible exterior, then note anything that needs watching.
Level 2 Inspection
A Level 2 inspection goes further, into accessible attics, crawl spaces and other parts of the venting system that a Level 1 doesn’t reach, usually with a camera. You need one after a chimney fire, after a change in fuel or appliance, when you buy a home, or when a problem keeps coming back. It’s the level most Crown Heights homeowners end up wanting, because older rowhouse chimneys tend to have surprises hidden behind the wall.
Level 3 Inspection
A Level 3 inspection is the deepest level and is only warranted when a serious hazard is suspected in a concealed area, which can mean opening up finishes to get at it. It’s not routine and we don’t recommend it lightly. If we think you need one, we’ll explain the specific evidence that led us there and what the access work involves before anything gets opened.
Camera Inspection
Camera inspection puts a lit camera down the flue so the interior is on screen in front of you, including the offsets and bends a flashlight can’t reach. It’s how we find cracked tiles, gaps at joints, heavy glaze and liner separation that no one can spot from the firebox. You watch the footage with us, and the stills go into your report.
Flue Inspection
A flue inspection focuses on the passage your smoke and gases travel through, checking for blockages, correct sizing, and whether the liner suits the appliance connected to it. A flue that’s too large for a modern appliance runs cold and collects creosote faster, and an unlined flue is a genuine hazard. We check fit and condition together, because one without the other tells you very little.
Real Estate Inspection
A real estate inspection gives buyers and sellers a documented picture of the chimney before closing, which matters in a neighborhood full of century-old houses. We inspect, photograph and report in plain language, noting what’s safe, what needs repair and roughly what it will take. It gives both sides a shared set of facts instead of a guess from a general home inspector who isn’t a chimney specialist.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
When we inspect a chimney, we’re also looking at how it was lined and repaired, because that tells us where trouble is likely to start. HeatShield ceramic repair systems are used to resurface masonry flues, and we know what a HeatShield-treated flue should look like years later and what failing edges or separation look like. Getting familiar with that surface is part of reading a flue properly.
Gelco and Olympia Chimney components turn up in caps, dampers and venting assemblies, and Famco products show up in fireplace and venting setups around older Brooklyn buildings. We know where each of these tends to wear, which joints loosen, and what normal aging looks like versus an actual defect. Whether you have equipment from these brands or any other make, we can help.
Signs You Need Chimney Inspection Right Now
Most chimney problems announce themselves quietly, long before anything dramatic happens. These are the signals worth acting on.
- You smell smoke in the room when the fire is lit. Smoke backing into the room means the draft isn’t working, which can point to a blockage, a damaged flue or a sizing problem. It’s also the simplest sign that something in the venting needs a proper look.
- There’s a dark stain on the ceiling or wall near the chimney. Brown or gray staining usually means water is getting in through the crown or flashing and soaking the masonry. Left alone, freeze-thaw cycles in a Brooklyn winter turn a small leak into cracked brick and loose mortar.
- You’ve had a chimney fire, even a small one. Many chimney fires go out on their own and are never reported, and they leave cracked tiles and glazed creosote behind. A camera inspection after any suspected fire tells you whether the flue is still safe to use.
- Your neighbor’s rowhouse shares your chimney wall and something changed. In Crown Heights, party walls and shared stacks are common, and damage in one side of a chimney can affect the other. If a neighboring unit had work done or a chimney issue came up, it’s worth having your side checked.
- It’s been years since anyone looked, or you’ve never had it inspected. If you can’t remember the last inspection, that’s reason enough. A first inspection on an older house establishes a baseline you can measure against from then on.
Safety is the real reason to act. Creosote buildup in a flue is what fuels chimney fires, and a blocked or damaged flue can let carbon monoxide back into the home instead of venting it outside. We won’t exaggerate this to sell you work. We will tell you plainly what we found and whether it can safely wait.

Our Chimney Inspection Process – Step by Step
- 1
We start with a conversation. Before anyone gets on a ladder, we ask what you’ve noticed: smells, smoke, staining, what you burn and how often. That history shapes where we look hardest, and it means you’re not paying for a generic walkthrough.
- 2
We inspect the accessible exterior. Cap, crown, flashing, brickwork and mortar joints get checked from top to bottom. We photograph what we find, including the things that are fine, because a report that only lists problems isn’t a baseline.
- 3
We check the firebox and the accessible flue. The damper, firebox panels and the flue opening get a close visual inspection, along with the smoke chamber above. This is where we first judge whether a camera run is needed.
- 4
We run a camera down the flue. A lit camera lets us see the full interior, including offsets, and we walk you through the footage in real time. If there’s a liner, we check its seams and connections. If there isn’t, we say so.
- 5
We write it up and explain it. You get a photo report and a plain-language explanation of what we found: what’s safe, what needs repair, what can wait, and what it would take. No recommendations without evidence you’ve seen yourself.
Repairs we do recommend are handled with professional-grade materials chosen for flue environments, including HeatShield ceramic repair systems for masonry flues and DuraFlex flexible liner systems for relining. That continuity matters: the people who inspected your chimney are the people who can put it right, and there’s no handoff to a second contractor for cap, crown or structural work.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Crown Heights?
A typical chimney inspection in Crown Heights runs about $150 to $350, and a camera inspection or Level 2 check with a written photo report generally lands toward the upper end of that range. A straightforward Level 1 visual inspection alongside a routine sweep usually sits at the lower end. The written estimate you get before booking is the final word on price.
| Service | Typical estimated range | What drives the price |
|---|---|---|
| Level 1 visual inspection | $150 – $200 | Single flue, straightforward access |
| Level 2 inspection with camera | $225 – $350 | Camera run, attic or crawl space access, number of flues |
| Real estate inspection with report | $250 – $400 | Documentation depth, multiple appliances, access limits |
| Level 3 inspection | Quoted per job | Access work required; priced only after the evidence is clear |
What affects the price: how many flues the house has, whether the chimney serves a fireplace, a boiler or both, how easy the roof and attic are to reach, and whether the report needs to be formal enough for a real estate transaction. A multiflue stack in an old brownstone takes longer than a single-flue chimney, and that’s reflected honestly.
How to avoid overpaying: ask for the inspection level up front and get the findings in writing with photos. That’s the protection. Nothing gets recommended here without camera evidence you’ve watched with us, and we’ll tell you when work can safely wait a season or more. Every estimate is free and sets the price per job before we book.
Chimney Inspection Near Crown Heights – Our Service Area
We work throughout Crown Heights and the surrounding Brooklyn neighborhoods, including Prospect Heights, Bedford-Stuyvesant, Flatbush, Brownsville, Clinton Hill, Fort Greene, Kensington and Bushwick, plus East Flatbush and Williamsburg where we also handle chimney inspection calls. Response times depend on the day, and same-day bookings are often possible. For the wider area, our Chimney Sweep Crown Heights page covers the full service picture, and if you’re comparing nearby options, this chimney inspection page explains what we do there. Calling is the fastest way to find a slot.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Crown Heights
A chimney inspection is a professional evaluation of your chimney and venting system to confirm it’s safe to use and structurally sound. It covers the firebox, flue, cap, crown and visible masonry, and it’s classified into levels depending on how deep the check needs to go. We do all three levels and explain which one fits your situation before we start. Call (833) 858-5823 for an exact quote; estimates are free.
Most inspections take 45 minutes to an hour and a half, depending on the level and how many flues you have. A Level 1 check is quick; a Level 2 with a camera run and attic access takes longer. We’ll give you a realistic time window when you book so you can plan your day.
Most chimney inspections in Crown Heights run about $150 to $350, with camera inspections and Level 2 reports toward the higher end. The number of flues, access and whether you need formal real estate documentation all affect it. You’ll get a flat price before we book, and the written estimate sets the final cost. Call (833) 858-5823 for an exact quote; estimates are free.
Yes. We inspect and service chimneys lined or fitted with HeatShield ceramic repair systems, Gelco components, Olympia Chimney products and Famco venting, and we recognize how each one ages. Knowing the material helps us tell normal wear from a real defect during the inspection. Whatever make is in your chimney, we can assess it.
Same-day inspections are often available. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 858-5823 and we’ll find you the soonest slot.
Our work carries a satisfaction guarantee: if something we inspected or repaired isn’t right, we come back and make it right. We’d rather be clear about that than promise terms in fine print. Any repair work is quoted in writing beforehand so you know exactly what you’re agreeing to.
Clear the area around the fireplace and make sure we can reach the attic or roof access if you have one. Don’t burn anything for at least 24 hours before the visit, so the flue is cool and safe to inspect. If you have prior paperwork or reports on the chimney, have them ready; it helps us build a fuller picture.
Schedule Your Chimney Inspection Service in Crown Heights Today
If it’s been a while since anyone looked at your chimney, or something about it has you wondering, book an inspection and get real answers instead of guesses. You’ll get a flat price up front, camera evidence you can see yourself, and an honest read on what’s safe, what needs repair and what can wait. Call (833) 858-5823. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. No-obligation estimates, free.
Written by the team at Chimney Sweep Crown Heights.