Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Brooklyn Heights
Caps and crowns are small pieces of a chimney with an outsized job, and in Brooklyn Heights they do that job against salt air, nor’easter rain and brick that’s been on the roof since the 1800s. We work on chimney systems only, so when we look at your stack we’re looking at the whole thing: the crown, the masonry below it, the flues inside and the shared wall your building sits against. If you’re seeing loose mortar on the roof or water stains on the chimney breast, call (833) 858-5823. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Brooklyn Heights Homeowners Call Chimney Sweep Crown Heights for Chimney Cap & Crown
Brooklyn Heights is old, dense and protected, and those three things shape every cap and crown job here. Homes are attached, stacks are shared, and the district’s landmark status means a repair you can see from the street isn’t only your decision. Our technicians have up to 10 years of experience with exactly this kind of masonry, and we source from a vetted roster of professional-grade brands rather than whatever a general contractor keeps on hand.
That matters in Brooklyn Heights because nothing about these chimneys is standard. We’re familiar with the Greek Revival, Italianate and Victorian rowhouses that line the streets south of Atlantic Avenue and the narrow access those blocks create for getting onto a roof. Our reviews from Brooklyn Heights customers reflect the same two things neighbors ask about most: clear findings and no pressure to buy work that can wait.
Response into Brooklyn Heights is straightforward. Call and we book a visit, and we’ll tell you plainly what we see. We’re closed on Saturday; work is dispatched Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Brooklyn Heights
Our chimney cap & crown work covers the top of the chimney, which is where most water problems begin.
Cap Installation
A properly sized cap keeps rain, debris and animals out while letting exhaust escape. In Brooklyn Heights, where uncapped flues from removed coal stoves are still common on garden-level and parlor floors of brownstones, installation is often the first step toward sealing a stack that has been open to the weather for decades. Fit matters more than style here.

Cap Replacement
Old caps rust through, come loose in coastal wind or were the wrong size to begin with. When a replacement cap sits over a multi-flue stack shared with a neighbor, the sizing has to account for every flue in that stack, not just yours. We replace caps on Brooklyn Heights rowhouses and test that the draft still pulls correctly afterward.

Crown Repair
Many Brooklyn Heights chimneys were finished with a thin mortar wash rather than a real overhanging crown, and a hundred-plus freeze-thaw cycles have done their work on it. Repair means rebuilding that top surface so it sheds water away from the brick instead of into it. On landmarked buildings, we’ll flag what needs a Landmarks Preservation Commission conversation before we touch anything visible.

Crown Coating
Where a crown is intact but porous or hairline-cracked, a flexible coating can extend its life and keep water out of the chimney breast. It’s a sensible option for Brooklyn Heights masonry that’s sound but tired, and we’ll tell you when coating is enough and when repair is the honest answer.
Multi-Flue Cap and Custom Cap
Attached Brooklyn Heights rowhouses frequently share a single stack carrying several flues, and that’s where a generic cap fails. A multi-flue cap sized to the whole stack keeps each flue isolated so one appliance’s exhaust can’t push into another. Where the stack has an unusual footprint or a party-wall abutment, we specify a custom cap rather than forcing a stock size onto it.
Trusted Brands We Service in Brooklyn Heights
We work with professional-grade chimney materials: Copperfield caps and crowns, Famco and Olympia multi-flue caps, and DuraFlex liner systems when a cap or crown problem turns out to involve the flue itself. These are the lines certified chimney professionals use, chosen because they hold up in a marine climate rather than because they’re easy to source. We don’t claim parts sitting locally in Brooklyn Heights; what we do is specify the right product for your stack and keep the turnaround short. If a repair calls for HeatShield flue resurfacing, we handle it in the same visit.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Brooklyn Heights Homes
- Cross-contamination in shared stacks. When a neighboring gas appliance vents into a shared chimney and your cap is missing or poorly sealed, that exhaust can backdraft into your flue. A correctly sized multi-flue cap isolates each flue in the stack.
- Failed mortar crowns on 19th-century brownstones. Repeated January and February freeze-thaw cycles crack and spall the original thin mortar tops, letting water into the chimney breast. The damage is gradual until it isn’t.
- Party-wall flashing failures. Water coming in where abutting stacks meet often looks exactly like crown damage but is actually a flashing problem at the party wall. That calls for mason-level repair, not a coating.
- Open, abandoned flues. Flues left behind when coal stoves came out were rarely sealed, and on the parlor and garden levels of brownstones they’ve been open to rain and animals ever since. Capping them closes a long-standing gap.
Pricing for Chimney Cap & Crown in Brooklyn Heights, NY
These are typical Brooklyn Heights estimates, and the written estimate sets the final price. A standard single-flue cap installation runs about $195 to $385. A multi-flue or custom cap for a shared brownstone stack typically lands between $350 and $850, depending on flue count and footprint. Crown repair runs roughly $450 to $1,200, and crown coating $250 to $550.
What moves the number is masonry access, how much of the crown has failed, whether a party-wall flashing repair is needed too, and whether landmark review affects the scope. We give a flat-price sweep agreed before booking, include a camera inspection and photo report, and show you the evidence before recommending anything. Estimates are free.
We Also Serve Cities Near Brooklyn Heights
The same rowhouse-and-shared-stack conditions carry into the surrounding neighborhoods, so we also work in Fort Greene, Clinton Hill, Park Slope and Prospect Heights. If your building sits in Brooklyn Heights or just over the line, the approach doesn’t change: inspect first, show the evidence, and price the job in writing. Call and we’ll book a visit.
Serving Brooklyn Heights, NY – Our Local Coverage Area
We serve Brooklyn Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Brooklyn Heights
A properly sized multi-flue cap isolates each flue in a shared stack so exhaust from one appliance can’t push into another. In Brooklyn Heights’s attached rowhouses this is the most common cap problem we see. Call (833) 858-5823 and we’ll assess the stack and size the cap correctly.
Often yes, when the work changes what’s visible from the street. Because Brooklyn Heights is a landmarked district and stacks are frequently shared, any visible change may need Landmarks Preservation Commission approval plus coordination with your neighbor. We’ll flag that before work begins. Call for an estimate.
A custom multi-flue cap sized to the whole stack, not a stock single-flue cap. On Brooklyn Heights brownstones the flues serve a mix of fireplaces and abandoned coal-stove openings, and each needs its own isolated vent. Call (833) 858-5823 for an exact quote.
Look for loose mortar and spalling brick at the top of the stack, and water stains on the chimney breast inside. Brooklyn Heights winters cycle between wet and freezing, which cracks thin mortar crowns. We confirm with a camera inspection and photo report. Call for a free estimate.
The cap stops new debris and water, but it doesn’t remove creosote already in the flue. That needs a sweep, which we do in the same visit before installing the cap. Debris in a Brooklyn Heights firebox is a reason to check the whole flue. Call for an exact quote.
If you’ve spotted loose mortar on the roof, water on the chimney breast or an open flue that’s been that way for years, that’s worth a look before the next nor’easter. Call (833) 858-5823 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Crown Heights.