Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Flatbush
If your chimney is leaking, shedding brick or showing a rusted cap, you’re looking at a repair that Flatbush’s wet winters and storm-driven wind will only make worse. We work on chimney and fireplace systems and nothing else, which means the masonry, the flashing, the cap and the flue all get attention from the same trade. Flatbush’s century-old rowhouses and frame Victorians ask for that kind of focus. Call (833) 858-5823 and we’ll come out, look at what’s actually failing, and put the repair in writing before anything starts. If you need a wider look at what we do, our chimney repair team handles the full system.
Why Flatbush Homeowners Call Chimney Sweep Crown Heights for Chimney Repair
Flatbush has the dense, early-1900s blocks that make chimney work here different from most places in the city. Many of these Victorians and Edwardian rowhouses were subdivided into multi-family rentals, so a single chimney often serves several households at once. We understand that before we pick up a trowel. Access to a flue may run through a tenant’s kitchen or a hallway that was added decades after the chimney was built.
Our technicians have up to 10 years of experience and work only in this trade. When we show up on a Flatbush block, we’re not learning the neighborhood’s building stock as we go. We’re looking at the same construction we see across Flatbush, and we know that a cleaning or repair job here is as much about coordinating who’s affected as it is about the sweep.
Materials always come from professional-grade lines built for flue environments. We use HeatShield ceramic repair systems for flue resurfacing and DuraFlex flexible liners when a relining is the right answer. Those are the same standards certified chimney professionals work to.
Serving Flatbush means understanding the difference between what a storm damaged and what was already wearing out. We’ll tell you which is which, in plain language, with photos so you can see it for yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Flatbush
Every repair we quote is scoped against what the inspection finds. Nothing goes on the estimate that isn’t backed by something visible or measurable in the flue or on the roof.
Mortar Repointing
Flatbush’s cold, damp winters and nor’easter wind wear mortar joints faster than a sheltered chimney would see. When joints crack and recede, water reaches the brick and a freeze-thaw cycle starts doing damage from inside. Repointing is done with fresh mortar matched to the original, not smeared over the face, so the joint actually holds.

Chimney Waterproofing
Waterproofing on a Flatbush chimney needs to be breathable. Sealing saturated brick with the wrong product traps moisture and makes the spalling worse, which is why the sequence matters: dry the masonry first, then coat. On the original-brick chimneys around here, that order is what makes the treatment last.

Flashing Repair
The flashing where the chimney meets the roof is the first place storm water gets in. Wind-driven rain off the Atlantic works the seal open, and once it does, water tracks down into the attic and wall cavity. We reset or replace the flashing and check the counter-flashing against the masonry so the join is watertight.

Spalling Brick Repair
Spalling is what you see when brick faces peel and flake after repeated freeze-thaw cycles. In Flatbush’s old rowhouses it’s usually a symptom, not the disease: water got into the brick through failed mortar or flashing. We trace it back to the source, then replace the damaged brick so the repair holds.
We also handle chimney rebuilding and tuckpointing on Flatbush chimneys where the deterioration has gone deeper than surface work can reach. Nothing on the roof or in the flue gets touched until the inspection says it’s needed.
Trusted Brands We Service in Flatbush
We work with the professional-grade brands used across the chimney trade. That includes HeatShield for ceramic flue resurfacing, DuraFlex for flexible liners, Copperfield for components built for coastal conditions, and Gelco for repair work. When a repair calls for a specific material, we match the product to the job rather than substituting whatever is on hand. If your chimney has an older brand or an unusual setup, tell us what you know when you call and we’ll plan for it. Good materials matter in Flatbush’s damp climate, where the wrong product fails fast.
Common Chimney Repair Problems We See in Flatbush Homes
- Cracked mortar crowns. Storm-driven rain and wind off the Atlantic find the crack, water soaks the crown, and a freeze-thaw cycle splits it further. Left alone, the crown eventually lets water straight down into the top of the flue.
- Rusted galvanised caps and flashing. Flatbush’s damp coastal winters corrode galvanised steel quickly. Stainless components hold up much longer, which is why the upgrade pays for itself on a chimney exposed to this weather.
- Spalling brick faces. Once water gets into the brick through failed mortar or flashing, the face flakes off in sheets and collects on the roof and in the attic. The source of the water is what has to be fixed first.
- Orphaned and cross-connected flues. In the old Victorians, flues built for parlor stoves were later tapped by gas boilers and water heaters. A sweep here regularly turns up orphaned flues and cross-connected vents, and those need a camera inspection rather than a quick brush.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Flatbush, NY
Chimney repair pricing in Flatbush runs on what the inspection finds, and the written estimate is what you actually pay. Typical work in this market falls into these ranges:
| Repair | Typical Flatbush Cost |
|---|---|
| Mortar repointing | $350 – $900 |
| Flashing repair | $250 – $600 |
| Spalling brick repair | $400 – $1,200 |
| Chimney waterproofing | $300 – $750 |
| Partial or full chimney rebuild | $2,500 – $7,000 |
The range depends on how high the chimney runs, how far the deterioration has gone, and whether access is complicated by a subdivided Flatbush rental or a flue buried behind a later renovation. Estimates are free, and the price is set per job, in writing, before work begins.
We Also Serve Cities Near Flatbush
We cover chimney repair work across the surrounding neighborhoods, including Kensington, East Flatbush, Flatlands and Crown Heights. The building stock is similar block to block, so the same knowledge of old flues and coastal weather applies just about anywhere you are near Flatbush. If you’re close by, we’ll get out to take a look.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Flatbush
We recommend a Level 1 inspection every year and a Level 2 inspection after any storm event or change to how the chimney is used. Flatbush’s cold, damp winters and nor’easter wind stress mortar, crowns and flashing more than an inland climate would. Annual inspection is the interval the coastal exposure justifies, and it catches water intrusion before it reaches the brick.
Spalling is water damage, not old age. It happens when water gets into the brick through cracked mortar or failed flashing and a freeze-thaw cycle pops the face off. The fix starts with finding where the water is entering, then repairing that source before replacing the damaged brick. Call (833) 858-5823 and we’ll show you what we find.
Stainless, in most cases. Galvanised caps and flashing rust out fast in Flatbush’s damp coastal winters, while stainless components last much longer under the same exposure. The up-front difference in price is usually far less than replacing a rusted cap and flashing a few years later. For an exact quote on what your chimney needs, call us.
It varies by lease and ownership structure, and the repair scope should be documented before any mortar is applied. Because so many Flatbush rowhouses were subdivided, one chimney can serve a landlord and several tenants, with access running through separate units. We put the finding in writing and with photos so everyone can see what’s being asked for and why.
A Level 2 inspection is a camera inspection of the flue and smoke chamber, done whenever the flue has changed, after a chimney fire, or when cross-connected or orphaned flues are suspected. That’s common in the old Flatbush Victorians, where parlor-stove flues were later used by boilers and water heaters. It’s the right call before any repair scope is settled. Call (833) 858-5823 for a free estimate.
Safety, Access and the Shared Chimney
Here is what happens on a typical Flatbush chimney repair. The failure usually starts at the top of the chimney. Wind-driven rain off the Atlantic finds a crack in the mortar crown and works under the flashing. Water reaches the brick, and once the temperature drops, freeze-thaw cycles start popping the face off in spalling flakes that land on the roof and collect in the attic. A qualified local pro will run a Level 2 inspection with a camera to check the flue liner and smoke chamber, repoint the crown and joints, replace rusted galvanised caps and flashing with stainless, and then apply a breathable waterproofing coat. The order matters. Sealing over saturated brick traps the moisture that caused the problem in the first place.
The shared-chimney issue sits on top of that. In a subdivided Flatbush rowhouse, access to the flue may run through several units, and the scope of repair may involve flues that were cross-connected to gas boilers decades after the original masonry was laid. Before any mortar goes on, it’s worth knowing what you’re actually dealing with. A camera inspection of the flue tells you which lines are live, which are orphaned, and where the venting was modified. That matters for safety as much as for the repointing job. A flue that once served a parlor stove and now serves a water heater is doing a different job than the brick was built for. If you’re a landlord, get the scope in writing with the photos attached so you can clarify responsibility with your tenants before work begins. If you’re a tenant, ask for the same thing. A camera picture beats a verbal claim every time.
Safety starts at the flue. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. Call (833) 858-5823 for a free estimate. We’ll look at the chimney, show you what we find, and tell you plainly whether the repair can wait or not.
Written by the team at Chimney Sweep Crown Heights.