Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Bedford-Stuyvesant
If your rowhouse crown is cracked or your cap has rusted through, you’re looking at water getting into a brick flue that was never lined to handle it. We handle chimney cap and crown work across Bedford-Stuyvesant, from the brownstone blocks off Bedford Avenue to the Italianate rows near Nostrand. Our technicians have up to 10 years of experience with exactly these chimneys: shared party-wall stacks, original brick crowns, and flues that were repurposed more than once. Call (833) 858-5823 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Bedford-Stuyvesant Homeowners Call Chimney Sweep Crown Heights for Chimney Cap & Crown
We work only in the chimney and fireplace trade. That focus matters more in Bedford-Stuyvesant than almost anywhere, because the cap and crown work here is diagnosis first and repair second. A general roofer can slap a cap on a stack, but reading a 130-year-old flue takes someone who does nothing else.
Our reputation in Bedford-Stuyvesant comes from showing our work. Every inspection is documented with camera footage and a photo report, so you see the cracked crown wash or the open orphaned flue yourself before anyone recommends a dollar of work. Our technicians have up to 10 years of experience, and they’re trained on the professional-grade brands we use: HeatShield, DuraFlex, Copperfield, and Gelco.
Response time to Bedford-Stuyvesant is fast because it sits right next to our Crown Heights service area. When you call, we book a sweep or inspection and give you a flat-price agreement before anyone shows up. Call (833) 858-5823 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Bedford-Stuyvesant
Crowns and caps fail together on old rowhouse stacks, so we handle the whole assembly rather than one piece at a time. Here’s how each part of the job works in Bedford-Stuyvesant’s housing stock.
Cap Installation
A correctly sized cap keeps rain, birds, and squirrels out of every flue in the stack, not just the one you burn in. On Bedford-Stuyvesant’s shared party-wall chimneys, that usually means a multi-flue cap fitted over both openings instead of a single-flue lid on one side. We measure the actual flue dimensions before ordering, because a cap that’s too small leaves gaps at the corners.

Cap Replacement
Older caps rust through at the mesh and the seams, and a loose cap rattles or blows off in a storm. When we replace one in Bedford-Stuyvesant, we check the flue tile edges underneath at the same time, since a cap that’s been sitting crooked for years often hides a chipped crown or a cracked tile. You’ll see the condition in the inspection photos before we quote the replacement.

Crown Repair
The crown is the concrete or mortar cap on top of the brick stack, and it’s the first thing freeze-thaw cycling destroys on these 100-plus-year-old rowhouses. We rebuild failed crowns with proper overhang and a drip edge so water sheds past the brick instead of running into the mortar joints. Where the crown is cracked but structurally sound, coating may be the better answer, and we’ll tell you which one the photos support.

Crown Coating
A crown coating seals hairline cracks and spalled mortar before they open into full breaks, using a flexible material that moves with the brick instead of cracking off it. This is the right call on crowns that are intact but weathered, and it’s a fraction of the cost of a rebuild. On a shared Bedford-Stuyvesant stack, coating both sides at once is usually the practical move.
Trusted Brands We Service in Bedford-Stuyvesant
We work with professional-grade materials chosen for flue environments specifically: DuraFlex flexible liners, HeatShield ceramic flue repair systems, Copperfield caps, and Gelco products. These are the same lines certified chimney professionals use nationwide, not hardware-store substitutes. We don’t claim to keep parts stocked locally, and we won’t pretend a custom cap appears overnight. What we do is measure and specify correctly the first time, so the turnaround is predictable and the finished cap actually fits the stack. For a shared party-wall chimney in Bedford-Stuyvesant, getting the specification right is most of the job.
Common Chimney Cap & Crown Problems We See in Bedford-Stuyvesant Homes
- Spalled, cracked crowns from freeze-thaw cycling. Cold Northeast winters work on the exposed stack above the roofline all season, and the damp coastal air speeds up mortar joint decay. What starts as a hairline crack lets water track down an unlined brick flue and show up as damp or white efflorescence at the firebox and smoke chamber.
- A one-sided cap on a two-flue party-wall stack. In Bedford-Stuyvesant’s rowhouse pairs, a single chimney straddles the party wall and often serves two different flues. Fit a single-flue cap on your side and the neighbor’s abandoned flue stays wide open to rain and animals, so the cap decision quietly fails on the other side.
- Crowns never built for what the flue now vents. Original brick crowns on 1880s-1900s rowhouses were sized for coal, not for the draft and condensate of a retrofitted gas boiler or insert. A shallow crown and unsealed flashing let moisture wick straight into the mortar joints.
- Orphaned flues left unsealed. Decades of retrofits, from coal grates to oil furnaces to gas boilers, left plenty of unlined brick stacks venting nothing at all. An open, unused flue is a direct path for water and wildlife into the building.
Pricing for Chimney Cap & Crown in Bedford-Stuyvesant, NY
Chimney cap and crown work in Bedford-Stuyvesant runs from about $250 for a standard single-flue cap installed to $1,800 or more for a rebuilt crown on a shared two-flue stack. A crown coating typically lands between $350 and $650, and a custom multi-flue cap sized to a party-wall stack usually runs $600 to $1,400 depending on dimensions and material. The size of the stack, whether it’s one flue or two, the condition of the brick underneath, and the access all move the number. Those are estimates. The written estimate sets the final price, and the estimate itself is free. Nothing gets recommended here without camera evidence you can watch for yourself.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Bedford-Stuyvesant
We cover the neighborhoods around Bedford-Stuyvesant as well, including Williamsburg, Bushwick, Crown Heights, and Prospect Heights. The rowhouse stock and shared-stack geometry are close cousins across all of them, so the same approach applies. If you’re just outside Bedford-Stuyvesant, call and we’ll confirm coverage.
Serving Bedford-Stuyvesant, NY – Our Local Coverage Area
We serve Bedford-Stuyvesant and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Bedford-Stuyvesant
Yes, you can cap only your own flue, but on a shared party-wall stack it’s rarely the best fix. A single-flue cap leaves the other opening exposed, and if that side is an abandoned coal-era flue, water and animals get in right beside your sealed one. A multi-flue cap over the whole stack protects both without touching your neighbor’s flue interior. Call (833) 858-5823 for a free estimate.
Crumbling mortar on the crown itself is a crown problem, and the cap is a separate layer on top of it. The cap keeps rain and animals out of the flue openings; the crown is the concrete surface that sheds water off the brick below. If the crown is spalling, coating or rebuilding it comes first, then the cap goes back on. Camera inspection tells us which one the photos support. Call (833) 858-5823 for a free estimate.
You know because you see the evidence before anyone quotes you. Every inspection here comes with camera footage and a photo report you keep, and we say plainly when work can wait. A hairline crack that coating will handle doesn’t need a full rebuild, and we’ll tell you that. If the crown is sound, we’ll say so. Call (833) 858-5823 for a free estimate.
It changes the diagnosis more than the cap itself. A gas conversion changes the draft and the condensate inside the flue, and an original shallow brick crown was never built for either. That’s why a converted flue often needs a taller crown profile and proper flashing before a cap goes on. Camera inspection confirms whether the flue lining is intact underneath. Call (833) 858-5823 for a free estimate.
Yes, an annual look at the cap and crown is worth it even with no fires lit, because freeze-thaw damage happens whether or not you burn. Bedford-Stuyvesant’s cold winters and damp coastal air keep working on that exposed stack above the roofline all year. A quick inspection catches a cracked crown before water reaches the firebox. Call (833) 858-5823 for a free estimate.
A Shared Stack, a Two-Owner Decision
In Bedford-Stuyvesant’s rowhouse pairs, one chimney stack straddles the party wall and serves two flues that have lived very different lives. One side may have been retrofitted to a gas boiler; the other may still be an unlined brick flue from the coal era, leaking creosote or moisture into the mortar around it. That shared geometry, more than age alone, is what drives most of the cap and crown calls we get here. A cap or crown decision on your side is physically tied to what’s happening on your neighbor’s side of the same stack.
That’s also where the worst upselling in this trade happens. Homeowners get told they need a new liner, a rebuilt crown, and masonry work they have no way to verify. So we do it differently: nothing is recommended without camera evidence you can watch yourself, and we tell you plainly when work can safely wait. On a typical 1890s rowhouse, the crack and washed-out joints are already there from decades of freeze-thaw and damp air, and the usual fix is a rebuilt or coated crown with proper overhang and a correctly sized multi-flue cap over the shared stack. A qualified local pro confirms that on a Level 2 inspection camera before recommending anything past cap and crown work. You should insist on the same.
Call for a Free Chimney Cap & Crown Estimate in Bedford-Stuyvesant
Whether you’ve got a crumbling crown, a cap that’s rusted through, or a shared stack you’re unsure how to handle, the first step is a look with a camera. Our Chimney Cap & Crown team covers the full range in Bedford-Stuyvesant: cap installation, cap replacement, crown repair, crown coating, multi-flue caps, and custom caps. The estimate is free and the price is set per job by the written estimate. Call (833) 858-5823. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Crown Heights.