Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Clinton Hill
If you own a brownstone or rowhouse in Clinton Hill, your chimney is probably older than almost everything else on the block. Clinton Hill’s 19th-century brick stacks were built for coal, and many now vent gas boilers and water heaters into flues that were never lined for it. That mismatch is where most chimney repair starts in Clinton Hill. Call (833) 858-5823 and we’ll schedule a visit to look at the whole stack, not just the part you can see from the sidewalk. The estimate is free, and the local pro we connect you with is licensed and insured as New York requires.
Why Clinton Hill Homeowners Call Chimney Sweep Crown Heights for Chimney Repair
Clinton Hill is a neighborhood of dense, old, shared buildings, and that shapes every repair we scope here. A single stack along Clinton Avenue or a side street off DeKalb often carries several flues from more than one household. Our technicians have up to 10 years of experience reading these party-wall setups and know that a fix scoped for one flue isn’t automatically right for the one beside it.
We work only in the chimney and fireplace trade, so the inspection, the cleaning and the repair all come from the same specialist rather than a general contractor improvising. When you call about a Clinton Hill chimney, you get someone who has seen hundreds of brownstone stacks and can tell you plainly when repair can wait and when it can’t. Nothing gets recommended without camera footage you can watch yourself. A flat price is agreed before booking, and a satisfaction guarantee stands behind the work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Clinton Hill
The repairs that come up most in Clinton Hill homes are about water and age: mortar, brick, crown and flashing. Here’s how we handle each one.
Mortar Repointing in Clinton Hill
Repointing is replacing the crumbled outer mortar between bricks before the joints erode far enough to loosen the masonry behind them. On a Clinton Hill chimney, the joints above the roofline take the worst of it, because that’s where freeze-thaw cycles do their work. We match mortar to the original brick so the repair reads as part of the wall, not a patch.

Spalling Brick Repair in Clinton Hill
New York City’s humid summers and freezing winters push moisture into exposed brick, and when it freezes it flakes the face off the brick. That’s spalling. On the 3- and 4-story brownstones common on the side streets of Clinton Hill, spalling above the roofline is usually limited to a few courses, and targeted replacement is often enough. We don’t quote a full rebuild when the damage is a handful of bricks.

Chimney Waterproofing in Clinton Hill
Waterproofing is a breathable sealant that keeps rain out of the brick while letting moisture that’s already inside escape. On Clinton Hill chimneys it’s the single cheapest way to slow mortar and brick deterioration, and it works best right after repointing, once the joints are sound. We don’t waterproof over failing mortar, because trapping water inside does more harm than good.

Flashing Repair in Clinton Hill
Flashing is the metal at the roof line that keeps water from running down between the chimney and the roof. On these tightly packed Clinton Hill rowhouses, a failed flashing joint can leak into the neighbor’s ceiling as easily as your own. We check it on every repair visit, and when it’s compromised we fix it before we close out the job.
Trusted Brands We Service in Clinton Hill
For flue repair and relining, we work with materials engineered for chimneys: HeatShield ceramic systems for resurfacing a deteriorating masonry flue, DuraFlex flexible liners for relining, Gelco for caps and crowns, and Copperfield for liners and components. Sourcing from these professional-grade lines matters in a Clinton Hill brownstone, where an improvised substitute tends to fail within a few heating seasons. We don’t claim to stock parts locally. We turn around what the job needs, and the written estimate names the materials so you know exactly what’s going into your chimney.
Common Chimney Repair Problems We See in Clinton Hill Homes
- Unlined flues venting gas appliances. Many Clinton Hill brownstones have a gas boiler or water heater breeched into a flue built for coal. That flue needs a proper liner before anything else is scoped, and we show you the camera footage of why.
- Crumbling mortar and spalling above the parapet. The top of the stack takes the weather. When the joints erode and the brick face flakes, targeted repointing and waterproofing often fix the real problem without a full rebuild.
- Offsets and hidden smoke chambers behind plaster. Conversions left offsets and breeching that hide creosote and failed smoke chambers. A brush-only cleaning misses what only a camera can reveal.
- No cleanout at the base. In many brownstones the flue runs behind original plaster with no access at the bottom. That means working from the roof, or cutting an access hatch, before we can even scope the repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Clinton Hill, NY
Here are typical estimated ranges for the work we do in Clinton Hill. Every job is priced per job by a written estimate, so the final number is set once we’ve seen the flue on camera.
- Mortar repointing: roughly $450 – $1,400 depending on how many joints and how much roof access is involved.
- Spalling brick repair: roughly $300 – $900 for a focused section above the roofline.
- Chimney waterproofing: roughly $250 – $600 for a standard stack.
- Flashing repair: roughly $250 – $750, and more when the flashing ties into a shared party wall.
- Full chimney rebuild: roughly $3,000 – $9,000, quoted only when the camera and the brick show it’s actually necessary.
Expect repair pricing in Clinton Hill to run close to the rest of brownstone Brooklyn. The variables are access (a parapet-lined areaway is harder to stage than an open roof), the number of flues involved, and whether the fix is targeted or extensive.
We Also Serve Cities Near Clinton Hill
We work throughout the surrounding neighborhoods, so if you’re just outside Clinton Hill you’re still in range. That includes Fort Greene, Prospect Heights, Williamsburg, and Park Slope. If you’re not sure whether your address falls inside the area, a quick call sorts it out. You can reach our chimney repair team at (833) 858-5823.
Serving Clinton Hill, NY – Our Local Coverage Area
We serve Clinton Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Clinton Hill
Yes. A missing cleanout doesn’t stop an inspection; it just changes how we get to the flue. In many Clinton Hill brownstones the flue runs behind original plaster with no base access, so we either work entirely from the roof or cut an access hatch so we can reach and repair the base. That’s standard for these buildings. Call (833) 858-5823 and we’ll walk you through what access your stack allows.
Usually yes, and it’s the repair we check first, because venting gas into an unlined flue meant for coal is a real problem. We run a camera down the flue and show you the footage of the missing liner before we recommend anything. The fix is typically a HeatShield resurface or a DuraFlex liner sized to the appliance. Nothing is quoted until you’ve seen the evidence. Call (833) 858-5823 for an exact quote; estimates are free.
In most Clinton Hill cases it’s repointing and waterproofing, not a rebuild. We look at how deep the damage goes. If the crumbling is at the surface and the brick body is sound, targeted repointing plus waterproofing addresses the actual deterioration. A full rebuild is only justified when the brick itself is failing through. We don’t quote a rebuild to fix a mortar problem. Call (833) 858-5823 to have it looked at.
Carefully and per flue. Clinton Hill party-wall stacks carry several flues from more than one household, so we scope each flue on its own rather than treating the whole stack as one unit. If the work touches shared masonry, we explain what’s shared and what isn’t before anyone commits. Call (833) 858-5823 to talk through a shared chimney.
A Level 1 inspection covers the readily accessible parts of the system during routine service. A Level 2 inspection goes further, with a camera down each flue and a look at concealed areas, which is what an older Clinton Hill chimney with offsets and unlined flues needs before any repair is scoped. If you’re planning a repair, a Level 2 gives us the evidence to price it honestly. Call (833) 858-5823; estimates are free.
Ready to Book a Clinton Hill Chimney Repair?
Old chimneys in Clinton Hill deserve a straight answer, not a sales pitch. We’ll look at each flue on camera, show you what we find, and recommend only what the evidence supports. If a repair can safely wait, we’ll tell you. Call (833) 858-5823 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Crown Heights.