Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Park Slope
If you live in Park Slope and your chimney is showing its age, you already know the warning signs: a chunk of mortar on the sidewalk, a rust stain creeping down the parlor wall, a cap that looks like it lost a fight with the weather. We repair chimneys here for a living, and we know the housing stock well. The brownstones and rowhouses along Sixth Avenue and down toward the slope’s lower blocks were built for coal and wood, and their masonry has been taking a coastal beating ever since. Call (833) 858-5823. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Why Park Slope Homeowners Call Chimney Sweep Crown Heights for Chimney Repair
We do one thing: chimneys and fireplaces. Every technician on our team has up to 10 years of experience, and every material we bring is made for flue environments, not borrowed from general contracting. That includes HeatShield ceramic repair systems for flue resurfacing and DuraFlex flexible liner systems for relining, along with cap, crown, and structural work we handle directly rather than farming out.
Park Slope customers call us back because we inspect before we quote. Nothing gets recommended that you can’t see in the camera footage and photo report. If a joint can wait until spring, we say so. If a crown is letting water into the stack, we tell you why and what it takes to stop it.
Our local knowledge is the practical kind. We understand shared party-wall stacks, the logistics of working around original plaster and cornices, and how to get materials through a stoop-front entry without tearing up your front steps. That matters in a neighborhood where the details on a facade are part of the house’s identity.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Park Slope
Mortar Repointing
Repointing is the bread and butter of Park Slope chimney work. Those 1880s through 1910s stacks were built with soft mortar that flexes with the brick, and hard modern mortar or caulk won’t do it justice. We grind out the failed joints and pack in new mortar matched to the original, so the repair moves with the masonry instead of cracking it.

Spalling Brick Repair
Spalling happens when water gets into brick and the freeze-thaw cycle pops the face off. On Park Slope’s historic brick, the exposed chimney tops above the roofline take the worst of it. We replace the failed units with matched brick and address the moisture source, because replacing brick without fixing the water path just buys you a few more winters.

Chimney Waterproofing
Waterproofing is the single most useful thing you can do for a brownstone chimney. We apply a breathable treatment that keeps rain out while letting the masonry dry from inside. On soft historic brick, sealing it shut with a non-breathable product traps moisture and makes spalling worse, so the choice of product matters as much as the application.

Flashing Repair
Flashing is where a roof meets a chimney, and it’s where most water gets in. Salt air and humidity corrode galvanized flashing faster than you’d expect this close to the harbor. We replace failed flashing with properly detailed metal and make sure the counterflashing sheds water away from the stack instead of channeling it into the brick.
Trusted Brands We Service in Park Slope
We’re trained on and source from a vetted roster of professional-grade chimney brands: HeatShield, DuraFlex, Copperfield, and Gelco, among others. We don’t claim to stock parts or run a warehouse out of Park Slope. What we do is specify the right component for your flue and get it in hand quickly, so a repointing job or a flashing replacement isn’t held up waiting on the wrong material. Stainless components hold up to coastal exposure in ways galvanized parts simply don’t, and we’ll walk you through the choice.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Park Slope Homes
- Corroded caps and flashing. Salt air and humidity eat galvanized metal from the outside in, and the first sign is often a rust stain on an interior wall below the roofline. Once the cap fails, water runs straight down the flue.
- Spalling brick and crumbling mortar joints. Freeze-thaw cycles work on moisture trapped in soft historic brick, and the chimney top is the most exposed surface on the whole house. Left alone, the joints open and the brick faces start to pop.
- Cracked or missing flue liner tiles in shared stacks. On the party-wall rows around the Park Slope Historic District, a breached liner can mean cross-venting between two households. That’s a draft problem and a safety problem at once.
- Water infiltration through the crown. An old crown that’s cracked or pitched the wrong way sends water into the masonry instead of off the roof. The damage shows up later as rusted dampers and stained plaster.
Pricing for Chimney Repair in Park Slope, NY
Typical Park Slope chimney repair costs run roughly $250 to $600 for mortar repointing on a standard stack, $400 to $1,200 for flashing repair depending on access and the metal specified, and $600 to $1,800 for chimney waterproofing on a full exterior stack. Spalling brick repair sits in the middle of that range depending on how many units need replacing. These are estimates for this market, and the written estimate sets the final price. Factors that push cost up include height, shared-stack access, and the condition of the crown. We give you the estimate for free, with the camera inspection and photo report included, so you can see the evidence behind every line. Where work can safely wait, we’ll say so.
We Also Serve Cities Near Park Slope
Our service area reaches well beyond one neighborhood. If you’re in Prospect Heights, Clinton Hill, Brooklyn Heights, or Fort Greene, we cover chimney repair there too, and the same approach applies: inspect first, quote what the camera shows, and repair with materials built for the job. Living in Park Slope or next door, you’ll get the same specialist attention, and if you’d like the full scope of our work, see our chimney repair services.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Park Slope
Once a year is the right interval for coastal exposure, and more often if you burn wood regularly. Salt air, humidity, and freeze-thaw cycles degrade caps, flashing, and masonry faster here than in inland neighborhoods. A yearly inspection catches a failing crown before it turns into a rebuilt stack. Call (833) 858-5823 for a free estimate on an inspection.
Repointing is grinding out failed mortar and replacing it; tuckpointing is a finish technique that adds a contrasting mortar line for a more decorative joint. For most brownstone chimney repair, repointing is what’s actually needed to restore the joint. Tuckpointing comes up when the facade look matters. We’ll tell you which one your stack calls for and what each costs. Call (833) 858-5823 for an exact quote.
A shared stack venting between two rowhouses is a real cross-venting condition, and it should be diagnosed with a camera inspection before anything gets repaired. The fix usually involves relining one or both flues with a system like DuraFlex and coordinating with the adjoining owner. Because these stacks were built as one masonry mass, the repair is a two-house conversation. Call (833) 858-5823 to book an inspection.
Yes, and stainless is the better choice for this climate. Galvanized metal corrodes under salt air and humidity, and a stainless cap holds up far longer. The swap is straightforward once the crown is sound. If the crown needs work too, we’ll price both together. Call (833) 858-5823 for a free estimate.
It works by using a breathable treatment that repels rain while letting moisture escape from inside the masonry. Soft historic brick needs to dry outward, and a non-breathable sealer traps water and accelerates spalling. Applied correctly, waterproofing is the cheapest defense against the cycle that destroys chimney tops here. Call (833) 858-5823 to get yours priced.
Fire safety starts at the flue, and in Park Slope’s older brownstones that means knowing what your stack is actually doing. Our technicians have up to 10 years of experience, we work with HeatShield and Copperfield materials engineered for the job, and the camera inspection and photo report come with the estimate. Call (833) 858-5823 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Crown Heights.