Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Kensington, NY
We provide independent DuraFlex service across Kensington, from the rowhouse blocks off Church Avenue to the two- and three-family buildings near Ocean Parkway. Here’s the quick answer: in Kensington, a DuraFlex liner usually needs attention because the chimney serves a gas boiler, not a wood fire, so the failure we find most is a degraded insulation wrap or a loose top plate, not heavy creosote. We’re an independent shop. We’re not affiliated with, authorized by or endorsed by DuraFlex, and we tell you plainly whether your liner is worth saving or needs replacing. Call (833) 858-5823 for a free estimate.

Why Kensington Residents Choose Us for DuraFlex Service
We work on DuraFlex liners and the venting that connects to them constantly in Brooklyn’s older rowhouse stock. That matters in Kensington, where the chimney on a 1920s brick building was built for a coal or oil furnace and now vents a gas-fired boiler. The liner materials behave differently in that setup than they do in a wood-burning flue, and we know the difference.
Our technicians have up to 10 years of experience, and every tool and material we bring is chosen for chimney work and nothing else. We use quality parts that actually fit DuraFlex flexible stainless and rigid liner sections, top plates, caps and insulation, because a liner is only as good as its joints and terminations. We schedule around your building, run a camera so you see what we see, and agree the flat price before we book the sweep. One specialist handles the sweep, the DuraFlex inspection and any cap or crown work in a single visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Kensington
- Insulation wrap degrading inside the clay tile flue. On gas boiler venting, condensate attacks the wrap before it touches the stainless. When it tears, the liner is left exposed to moisture it wasn’t meant to handle alone. This is the one we find most often where the chimney serves the heating plant rather than a fireplace.
- Liner-to-top-plate and liner-to-appliance joints loosening. A corroded connector lets flue gas and carbon monoxide spill instead of venting. In tightly attached two- and three-family buildings, that’s a serious problem, and it’s exactly what a Level 2 inspection is built to catch.
- Rust and pitting on stainless sections from water intrusion. A crown or flashing leak lets water down the flue, and freeze-thaw cycling on exposed Kensington brick makes it worse each winter. The stainless pits from the inside out.
- Crushed or mis-shaped liner at an offset. Where an oversized liner was forced into an undersized clay tile flue, the liner narrows, draft drops, and soot and debris collect at the pinch point.
- Debris and animal nesting in an open flue. With no cap, a flue on a low-rise building fills with leaves and nests, blocking draft and holding moisture against the liner. Cap installation solves the cause, not just the symptom.
DuraFlex Service in Kensington: What Local Conditions Mean for Your Equipment
Kensington’s attached rowhouses share brick party-wall stacks, and that single fact changes how a DuraFlex inspection has to be done here. A failed crown or flashing on one liner flue doesn’t stay on one property. It routinely shows up as damp staining and efflorescence on a neighbor’s chimney breast two doors down, and by the time the stain appears, water has been travelling through shared brick for a while. So a proper inspection in Kensington often has to look at adjacent flues, not just the one being serviced. We check the shared stack and the neighboring chimneys for the same moisture path, because re-sealing one crown while the water finds another route just moves the problem. Add a humid four-season climate with cold winters that drives freeze-thaw on exposed crowns, and you get accelerated spalling and liner deterioration that a quick sweep alone would never surface. A typical Kensington rowhouse call starts with a damp stain on an upstairs wall or a musty smell near the chimney breast. The flue turns out to be a decades-old clay tile stack with a flexible liner serving the gas boiler, its top plate loose and the crown cracked. The technician runs a Level 2 inspection with a camera, confirms whether the stainless is sound or perforated, checks the party-wall stack and neighboring flues, then re-seats or replaces the top plate and cap, repoints or coats the crown, and repairs or replaces the liner run only where it has actually failed.
DuraFlex Models & Products We Service in Kensington
In Kensington we service the DuraFlex flexible stainless liner in single-wall and insulated form, the flexible liner kits that pair a liner run with an integrated top plate and cap, rigid stainless liner sections used on straight flue runs, and the insulation wrap and tee fittings that make an offset flue work. We also handle the terminations that keep a liner honest: top plates, caps and the crown above them.
When a part has to be replaced, we fit DuraFlex-compatible OEM or equivalent-quality stainless components rather than mismatched cheap fittings. That choice matters more than most homeowners expect, because the joint is where a liner fails first. We are independent and not an authorized DuraFlex dealer, so our recommendation comes from what your camera inspection shows, not from what’s easiest to sell.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Kensington
Every DuraFlex job in Kensington is priced per job by a written estimate, and that estimate is free. What drives the cost is straightforward: whether the liner run is sound and only needs connections re-secured, or whether a failed section has to be replaced; how much crown and flashing work is needed to close the water path; and whether the flue needs a new cap or multi-flue cap. Inspection depth matters too, since a Level 2 camera inspection on a party-wall stack takes longer than a single-flue check.
We don’t guess at numbers over the phone for work we haven’t seen. The written estimate sets the final price, and you approve it before we book the sweep. To get a figure for your Kensington chimney, call (833) 858-5823. Estimates are free.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Kensington
Yes. Gas boiler venting produces condensate that attacks the liner wrap and joints even without wood smoke, so an annual sweep paired with a proper inspection is how you catch a failing wrap or a loose top plate before it becomes a carbon monoxide problem. Call (833) 858-5823 to book yours.
Because Kensington’s attached rowhouses share brick party-wall stacks, water from a cracked crown or failed flashing travels through the shared masonry and surfaces on the neighboring chimney breast. We inspect the shared stack and adjacent flues, not just your own, so the water path actually gets closed. Call (833) 858-5823 for an inspection.
Usually yes, if the stainless itself is sound. Where the liner is intact and only the connections, top plate or crown have failed, re-securing the joints and correcting the crown and flashing is honest repair. Where the stainless is perforated or crushed beyond safe service, replacing the affected run is the right call, and the camera shows you why. Call (833) 858-5823 for a free estimate.
Often it is. A two-family building typically has more than one flue in the same stack, and one cap covering all of them keeps rain, leaves and nesting out of every flue at once instead of leaving the unused ones open to moisture. We’ll tell you on site whether your stack layout suits one.
A Level 2 inspection is a camera inspection of the flue plus a check of the accessible parts of the system: the liner surface, the joints, the top plate, cap, crown and flashing, along with the connected appliance. On a Kensington party-wall stack it also means looking at neighboring flues for the same moisture path. Call (833) 858-5823 to schedule one.
Service Areas Near Kensington
We serve Kensington and the neighborhoods around it, including Crown Heights, East Flatbush, Williamsburg, Prospect Heights and Bedford-Stuyvesant, and we work on Flatbush and Flatlands chimneys as well. If you’re on a rowhouse block nearby, our Kensington service covers the same shared-stack conditions you’ll find a street or two over.
Book Your DuraFlex Service in Kensington Today
If you’ve spotted damp staining, a loose cap or a smell near the chimney breast, get it looked at before the heating season. We’ll run the inspection, show you the camera findings and give you a written estimate before anything is booked. Call (833) 858-5823 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Crown Heights.