Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Brooklyn Heights, NY
We provide independent HeatShield service across Brooklyn Heights. The thing that sets our HeatShield work in this neighborhood apart is the building stock itself: nearly every chimney here belongs to a 19th-century rowhouse or brownstone, so relining a flue means working with fragile historic masonry, not a modern stack. We’re an independent HeatShield service provider, not affiliated with or authorized by the manufacturer. If you’ve got a parged or unlined flue that drafts poorly, call (833) 858-5823. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Brooklyn Heights Residents Choose Us for HeatShield Service
We work on HeatShield flue systems every week in Brooklyn Heights, from cast-in-place Ceramic liners used to restore unlined 19th-century flues to Resurfacing Mortar applied over cracked clay tile joints. That routine familiarity matters because HeatShield material performs differently depending on what’s behind it, and the soft brick of an 1830 – 1900 brownstone is a different substrate than a mid-century stack.
We also use the parts the system was designed for. HeatShield performance depends on the specific ceramic and mortar formulation, so we don’t substitute a generic castable mix and hope it bonds. Our technicians have up to 10 years of experience, and the local pro we connect you with is licensed and insured as the state requires.
Scheduling is straightforward: we book a sweep, tell you what the camera finds, and put the price in writing before any work starts. No guesswork, no surprise figures.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Brooklyn Heights
- Resurfacing Mortar failing over soft, spalling brick. Many brownstone flues in Brooklyn Heights were parged rather than properly lined before 1900, and when the underlying brick keeps spalling from East River damp and freeze-thaw, the mortar can crack and debond. The liner looks sound from the firebox while the substrate fails behind it.
- Ceramic liners installed beside unsealed abandoned flues. When coal stoves came out of these brownstones, the old flues were often left uncapped. A cast liner dropped in without first sealing that dead flue can draw moisture and draft poorly, a pattern that shows up repeatedly on converted garden- and parlor-level fireplaces.
- Undersized liners on small original masonry flues. Greek Revival and Italianate rowhouses have narrow interior chimneys. A HeatShield liner sized without measuring the actual flue opening produces weak draft and smoke roll-back into the room.
- Water intrusion at the liner interface. Nor’easters and coastal storms push rain into uncapped or poorly flashed stacks, and the treated flue then shows efflorescence and joint staining instead of the usual creosote pattern.
- Cracked joints on an Ultra-lined flue. High-build lining buys years on a badly deteriorated flue, but if the crown above it is failing, water keeps reaching the joints. We check the crown and flashing alongside the liner.
HeatShield Service in Brooklyn Heights: What Local Conditions Mean for Your Equipment
Worth knowing before anyone quotes you a reline: in Brooklyn Heights, plenty of brownstone flues were abandoned when coal stoves were removed and never sealed or capped. Technicians here routinely find an entire unused flue riding alongside a live one in the same stack, especially on the streets south of Atlantic Avenue. That dead flue is a moisture path and a draft problem, and it changes how a HeatShield job has to be sequenced. You can’t just cast a liner into the live flue and walk away, because the unsealed neighbor keeps pulling damp air through the stack and the new liner never dries out properly. The fix starts with a Level 2 camera inspection of both flues, then capping and sealing the abandoned one before any HeatShield Ceramic goes in. That’s the step most rushed quotes skip.
HeatShield Models & Products We Service in Brooklyn Heights
We service the full range of HeatShield flue-relining products in Brooklyn Heights: the cast-in-place HeatShield Ceramic system, Resurfacing Mortar for cracked and spalled clay tile joints, HeatShield Ultra for heavily deteriorated flues, and the Heat Shield relining material family used in gas-conversion and wood-burning fireplace flues.
Choosing parts that fit is most of the job. We measure the actual flue opening, check what the substrate will hold, and match the product to the condition rather than reaching for one system out of habit. Where the surrounding brick is sound, we repair or reline the existing HeatShield liner. Where it has spalled so far the liner has nothing to bond to, we say so and quote replacement.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Brooklyn Heights
You’ll want the numbers before you book, so here’s how it usually breaks down. These are typical estimates for the work, not fixed prices; the written estimate sets the final figure.
- Level 2 camera inspection with photo report: included in the estimate process
- Standard sweep and cleaning: quoted per flue
- HeatShield Resurfacing Mortar on cracked tile joints: quoted per flue after inspection
- HeatShield Ceramic or Ultra relining: quoted by flue length and condition
- Capping and sealing an abandoned flue: quoted alongside the reline
- Chimney waterproofing and tuckpointing: quoted by stack size and access
What drives cost is flue length, how much of the substrate holds, whether a second dead flue needs sealing, and whether the stack needs repointing before lining. A free estimate includes the Level 2 inspection, camera footage you can look at yourself, and a flat price agreed before we book. Nothing gets recommended without evidence you’ve seen. Call (833) 858-5823 for an exact quote.
Serving Brooklyn Heights, NY – Our Local Coverage Area
We serve Brooklyn Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Brooklyn Heights
Often yes, but only after the substrate is checked. HeatShield Ceramic is designed for exactly this: restoring a parged or unlined 19th-century flue back to a smooth, sealed lining. If the brick behind the parging has spalled badly, the liner has nothing solid to bond to and we’ll tell you that plainly rather than line over it.
Damp smell after relining usually means water is still getting in somewhere above the liner. In Brooklyn Heights the common causes are an uncapped abandoned flue in the same stack, failing flashing, or a cracked crown letting nor’easter rain through. Efflorescence and joint staining are the visual clues. It’s fixable, and it isn’t a reason to rip out a sound liner.
If the work is visible from the street, likely yes. Brooklyn Heights is a landmarked district, so even repointing a chimney breast that shows from the sidewalk can trigger a Landmarks Preservation Commission review. Interior flue lining generally doesn’t, but we flag it early so approval doesn’t stall the job halfway.
Yes, once ownership and access are sorted out. Many buildings here are co-ops or multi-unit rentals where the flue serves more than one unit, and it’s often unclear who’s responsible. A Level 2 camera inspection establishes what’s shared, then we scope the work so the building and the owner both know what’s being done.
White staining is efflorescence, and it means moisture is moving through the masonry. It’s not the liner failing on its own; it’s water arriving from the top or the sides. Waterproofing the stack and checking the cap and flashing usually stops it. Call (833) 858-5823 for an exact quote on inspection and waterproofing, estimates are free.
Service Areas Near Brooklyn Heights
We also work on HeatShield systems in Fort Greene and Clinton Hill, both a short distance from the landmarked blocks here. Alongside those, we cover Crown Heights, Prospect Heights, Bedford-Stuyvesant, Williamsburg, East Flatbush, and Flatbush for the same sweep, inspection, and relining work.
Book Your HeatShield Service in Brooklyn Heights Today
If your flue is drafting badly or showing white staining, get a camera inspection before anything else. Call (833) 858-5823 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. For HeatShield work on Brooklyn Heights brownstones, we’re the independent specialist to call.
Written by the team at Chimney Sweep Crown Heights.