Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Kensington, NY
We service Gelco chimney caps, dampers and flue components independently across Kensington, and we’re not affiliated with or authorized by the manufacturer. What makes our Gelco work here different is that most of what we find on these caps and dampers traces back to the attached brick rowhouse stacks in Kensington (11218), where freeze-thaw on an exposed crown and moisture from gas-fired boiler venting do more damage than wood smoke ever will. Our technicians have up to 10 years of experience, and every visit pairs Gelco service with a proper inspection of the flue beneath it. Call (833) 858-5823. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Kensington Residents Choose Us for Gelco Service
Gelco caps and dampers are straightforward hardware, but the flues they sit on in Kensington are not. These are century-old brick stacks with clay tile liners, gas boiler venting and shared walls, and the faults that show up on a Gelco cap in Kensington aren’t the faults you’d find in a suburban house with a masonry fireplace. We know how these caps, dampers and flue components actually age in century-old brick stacks because we work on them regularly, not as Gelco representatives but as independent technicians.
Being independent matters. We’re not tied to any manufacturer’s sales line, so we can tell you plainly when your original Gelco component is worth replacing with a like-for-like unit and when a quality stainless aftermarket cap matched to your flue’s actual tile dimensions is the honest answer. We’re an independent Gelco service provider, not manufacturer-affiliated or authorized.
Scheduling is equally direct. You call, we book an inspection-first visit, and we arrive with the parts and tools to sort the Gelco components and the flue behind them in one trip. No guessing. No “we’ll order it and come back.”
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Kensington
These are the recurring Gelco issues we encounter on Kensington rowhouses and two- and three-family buildings, and each one ties back to how these buildings are built and how they vent.
- Cap mounting bolts lost to freeze-thaw. Stainless or galvanized Gelco caps on old brick stacks work their mounting hardware loose through repeated winter freezing and thawing. The cap then rattles, blows off in a storm, and leaves the flue open to rain and bird nesting. On a Kensington block with an exposed stack, this happens sooner than you’d expect.
- Top-mount dampers seized shut or stuck open. Years of humid summers and moisture from gas-fired boiler venting rust the hinge pins on cast hardware, and a Gelco top-mount damper ends up stuck. Stuck open, it lets cold air and downdraft in; stuck shut, it can push carbon monoxide back into the living space. Either way it needs a real look, not a guess.
- Slip-in caps sitting loose. Gelco slip-in caps sized for older clay tile flues ride on tile that has spalled or cracked over the decades. A loose fit lets water run down the outside of the flue inside the chase, which is a common reason a damp stain turns up in a neighbor’s ceiling rather than your own.
- Mesh screens clogged. The mesh on a Gelco cap fills with soot, bird debris and leaf litter on densely packed Kensington blocks. On gas-fired boiler flues that were never sized for restriction, a clogged screen chokes draft and starts causing real venting trouble.
- Caps installed over failing tile and crown. A Gelco cap gets blamed for leaks that actually start beneath it. If the clay tile or the crown under the cap is failing, no cap swap will fix it, and the repair decision belongs at the masonry.
Gelco Service in Kensington: What Local Conditions Mean for Your Equipment
Kensington’s attached brick rowhouses share party-wall chimney stacks, and that single fact reshapes how Gelco service works here. A failed Gelco cap or a leaking crown on one 11218 house routinely shows up as damp staining on a neighbor’s ceiling two doors down, because the shared brick lets water and moisture travel laterally through the party wall rather than straight down the inside of your own flue. So when we service a Gelco cap in Kensington, the inspection rarely stops at your fireplace. We look at the adjoining flues in the same stack, because a water path that starts at your cap’s loose mounting or a spalled tile behind it can surface somewhere else entirely. On top of that, cold winters and hot humid summers push freeze-thaw cycling against the exposed brick crowns and flashing, while the density of attached housing adds draft pressure that speeds spalling and liner deterioration.
What that means for Gelco owners in Kensington: fix the cap and damper, but check the shared stack while you’re up there. A cap swap that ignores the neighboring flue is half a job.
The Typical Gelco Call in Kensington
In a typical Kensington rowhouse, a homeowner calls about a downdraft or a wet stain near the chimney breast and finds the Gelco top-mount damper frozen open and the cap’s mesh clogged with soot and nesting debris. The usual cause is years of humid summers and freeze-thaw on the exposed stack loosening the cap hardware and rusting the damper. A qualified local pro will pull the cap, clear the flue, inspect the clay tile and crown for spalling, then refit or replace the Gelco components and check whether the shared party-wall flue next door is affected.
Gelco Models & Products We Service in Kensington
We service the full range of Gelco chimney components found on Kensington buildings: multi-flue chimney caps, single-flue stainless caps, top-mount dampers and slip-in universal chimney caps. These are simple, standardized pieces, and most of the time the right fix is a like-for-like replacement matched to what’s already there.
Where an original Gelco size is no longer made, we fit a quality stainless aftermarket cap measured to your flue’s actual clay tile dimensions rather than forcing a loose fit. We don’t stock or order OEM Gelco parts, and we won’t claim to. We repair, install and service Gelco equipment with quality parts that fit it, chosen for the flue in front of us. If the tile or crown beneath the cap is failing, we’ll say so instead of hiding it under new hardware.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Kensington
What you’ll pay for Gelco service in Kensington depends on three things: whether you need hardware refit or full replacement, how accessible the stack is on your rowhouse, and whether the inspection underneath uncovers a masonry problem the cap was concealing. The written estimate sets the final price, and it’s per job, so there’s no guessing at the phone stage.
- Cap and damper service call: inspection, hardware check and component service, quoted per job by written estimate.
- Gelco cap replacement: priced by cap type and flue size once we’ve measured the actual tile.
- Level 2 inspection: included where the flue or shared stack needs a closer look, with findings you can see for yourself.
The free estimate is exactly that: free. Nothing gets recommended without evidence you can look at, and we’ll tell you plainly when work can safely wait. Call (833) 858-5823 for an exact quote. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Kensington
Often it’s just the mounting hardware, but the cap has to be checked before anyone decides. On century-old brick stacks, missing bolts usually mean the cap was already loose from freeze-thaw before the storm finished the job. We inspect the cap body, the tile beneath it, and the bolt holes, then give you the honest call. Call (833) 858-5823 for a free estimate.
Because Kensington’s attached rowhouses share party-wall chimney stacks, so water from your failing Gelco cap or crown travels sideways through the shared brick and shows up next door. That’s why our inspections here often extend past your fireplace to the adjoining flues. Call (833) 858-5823 to book a look at the whole stack.
Yes. Gas flues still collect debris, and a clogged Gelco cap screen chokes draft on flues that were never sized for restriction. Annual cleaning and inspection is how you catch it before it affects venting. Call (833) 858-5823 for a free estimate.
Usually replace, but we verify before we recommend it. Rusted hinge pins on cast hardware are the common cause after humid summers and boiler moisture. If the damper’s seized shut, that’s a carbon monoxide concern and worth looking at promptly. Call (833) 858-5823.
Sometimes, but not always. A properly fitted Gelco cap can stop wind-driven downdraft, but if the fault is a seized damper or a restricted flue, a cap alone won’t solve it. Call (833) 858-5823 for a free estimate and we’ll tell you what’s actually causing it.
Service Areas Near Kensington
We also work on Gelco chimney components in Kensington and the surrounding neighborhoods, including Gelco service in Crown Heights, East Flatbush, Williamsburg, Prospect Heights, Bedford-Stuyvesant, Flatbush and Flatlands. Same inspection-first approach on every rowhouse stack.
Book Your Gelco Service in Kensington Today
If your Gelco cap, damper or flue needs attention in Kensington, we’ll come out, inspect the whole stack, and give you a free written estimate before any work begins. Call (833) 858-5823. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Crown Heights.