Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Bushwick
If you’re in Bushwick and your chimney cap is rusting through or the crown has cracked, you likely found the leak after a storm, not before it. That’s normal here. Bushwick’s 19th-century brick row houses share party walls and flat roofs, so a failed cap or crown often shows up as a stain in a neighbor’s unit before anyone climbs up to look. We’re a chimney-only company, and our technicians have up to 10 years of experience with the exact brick, stucco overlays, and capped-off flues common on these blocks. Call (833) 858-5823. We answer 24/7, and we can book a sweep or inspection with a camera check and photo report so you see the problem yourself.
Why Bushwick Homeowners Call Chimney Sweep Crown Heights for Chimney Cap & Crown
Bushwick homeowners call us because we do one thing: chimneys. Not gutters, not siding, not general handyman work. Every tool and every material we bring is chosen for masonry flues and fireplace systems, which matters on block after block of original brick chimneys that were sealed or relined for gas as these buildings changed hands.
When we work in Bushwick, we’re working with housing stock that most contractors misread. A chimney crown that was stuccoed over by a previous owner isn’t treated as “fine” here. We look for the crack underneath, because soft local brick plus nor’easter rain equals interior leaks that surface weeks after the storm. That’s why we camera-inspect and hand you the photos before we quote a repair.
We cover the full arc of cap and crown work: installation, replacement, crown repair, and crown coating, plus multi-flue and custom caps. If work can safely wait, we’ll tell you. Nothing gets recommended without camera evidence you can review yourself. The local pro we connect you with is licensed and insured as their state requires, and the price is set by the written estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Bushwick
Our chimney cap & crown team handles the whole job in one visit, from pulling the old rusted cap to crowning the top of the flue properly. Here’s how each service looks on a Bushwick chimney.
Cap Installation in Bushwick
Installing a new cap is the first line of defense against rain driving down an uncapped flue during a nor’easter. On Bushwick row houses, we match the cap to the flue count and to the available height above the parapet, since a flat roof and shared party wall leave very little working clearance. Stainless is the default recommendation here; galvanized is what fails first on these roofs.

Cap Replacement in Bushwick
Replacement is usually a corrosion call. Galvanized caps corrode quickly in Bushwick from salt air working with freeze-thaw cycles, leaving rust streaks down the brick and loose fittings rattling in the wind. Pulling a failed cap and setting a stainless replacement also gives us the first clear look at the crown, which is where hidden cracks tend to live.

Crown Repair in Bushwick
The crown is the sloped concrete or mortar top that sheds water away from the brick. When it cracks, water runs down into the masonry instead of off it, and because Bushwick row houses share party walls, that water can show up next door. Repair means removing the failed section, rebuilding the slope so it drains, and sealing it against further spalling.

Crown Coating in Bushwick
Crown coating seals a crown that’s still structurally sound but starting to weather. It’s a good option on Bushwick chimneys where the crown itself is intact but the surface is chalky or hairline-cracked. Coating buys time and slows moisture intrusion without rebuilding, and we use HeatShield ceramic repair systems for resurfacing work so the material is engineered for flue conditions, not improvised.
Trusted Brands We Service in Bushwick
We work with professional-grade chimney brands, the same lines used by certified chimney professionals across the country. That includes Famco caps and dampers, Copperfield crown and masonry products, and DuraFlex flexible liner systems when a cap or crown repair turns up a flue that needs relining. We also carry HeatShield ceramic repair systems for flue resurfacing. We don’t stock parts on a truck or in a warehouse; we source what the job calls for from this vetted roster, so you get the right component rather than whatever was on hand. When a Bushwick chimney needs a specific cap size or a custom build, we spec it, source it, and book the install.
Common Chimney Cap & Crown Problems We See in Bushwick Homes
The failure patterns repeat here, and they’re predictable once you know the housing stock.
- Galvanized caps rusting through. Salt air and freeze-thaw cycles eat galvanized fittings fast, and the rust streaks down the brick are usually the first visible sign. By the time you see them, the cap is often loose.
- Stucco or concrete overlays trapping moisture. Many Bushwick crowns were stuccoed over or capped with concrete by previous owners, which hides cracks instead of fixing them. Water gets in, soft brick spalls, and interior leaks appear after a heavy summer storm.
- Deferred repairs on shared party walls and flat roofs. Access is tight and the flashing sits close to the neighbor’s roofline, so crown and flashing repairs get put off until water shows up in an adjacent unit. That’s when a simple cap job becomes a joint masonry repair.
- Unlined or deteriorating clay tile. A lot of these original brick chimneys were converted to gas, and the flue now has clay tile that fails modern codes. A cap or crown inspection is often the moment that gets discovered, and it’s worth knowing before anything is repointed.
See the difference
Before
After
Before
After
Before
AfterHow Bushwick’s Party Walls Turn a Cap Job Into a Shared Repair
Here’s the part that’s specific to Bushwick and doesn’t apply everywhere. Because so many of these 19th-century brick row houses share a party wall and a flat roof, a failed chimney crown doesn’t stay on one side of the property line. Water that gets past a cracked crown wicks into the shared masonry and shows up in a neighbor’s unit first, which means the owner often doesn’t know anything is wrong until someone else mentions a ceiling stain. In many Bushwick row houses, the original brick crown has been stuccoed or capped with concrete by a previous owner, hiding the cracks that let nor’easter rain seep into that shared party wall. A qualified local pro typically removes the old cap, inspects the crown for spalling, and installs a custom stainless cap with a new crowned wash so water sheds away from the soft brick instead of into it. On a block where two units share the chimney stack, that’s a repair plan that protects both sides, and it’s why we walk the crown carefully and photograph what we find before recommending anything.
Pricing for Chimney Cap & Crown in Bushwick, NY
Prices here reflect what the work actually takes in Bushwick: tight roof access, shared party walls, and crowns that often hide damage under old stucco or concrete. The written estimate sets the final price, and the estimate itself is free. These are typical ranges for the neighborhood, not a quote for your chimney.
| Service | Typical Bushwick Range |
|---|---|
| Stainless cap installation (single flue) | $250 – $550 |
| Multi-flue cap installation | $450 – $900 |
| Custom stainless cap | $500 – $1,200 |
| Cap replacement (removing rusted cap) | $300 – $650 |
| Crown repair | $400 – $950 |
| Crown coating | $250 – $500 |
What moves the number: how many flues the cap covers, whether the old crown has to come off or can be repaired in place, and how much masonry access the party wall and flat roof allow. Call (833) 858-5823 for an exact quote; estimates are free.
We Also Serve Cities Near Bushwick
We bring the same cap and crown work to homeowners throughout Bushwick and the neighboring areas: Bedford-Stuyvesant, Williamsburg, Fort Greene, and Brownsville. The housing stock and coastal weather are similar across these neighborhoods, so the failure patterns carry over. Wherever you are in that stretch of Brooklyn, we can schedule a sweep or inspection with a camera check and photo report.
Serving Bushwick, NY – Our Local Coverage Area
We serve Bushwick and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Bushwick
Not always. The concrete or stucco overlay often hides cracks in the masonry underneath, so jumping straight to a stainless cap can trap the problem instead of fixing it. We remove the overlay, inspect the crown for spalling, and only then set the new cap, so the finished job sheds water correctly. Call (833) 858-5823 for an exact quote; estimates are free.
Because salt air and freeze-thaw cycles work on galvanized steel fast. Those two conditions together corrode the fittings, loosen the cap, and send rust streaks down the brick. Stainless replacement is what we usually recommend on Bushwick chimneys for that reason. Call (833) 858-5823 for an exact quote; estimates are free.
Once a year, and we’d lean toward treating the cap and crown check as part of that annual look given the corrosion and freeze-thaw here. A quick inspection after a heavy summer storm is worth doing too, since cracks in the crown often reveal themselves then. Call (833) 858-5823 to book one; estimates are free.
A failed crown or flashing on the shared stack is the usual cause. Because the party wall is shared, water that gets past a cracked crown wicks into the common masonry and surfaces on the other side. It’s often a joint repair, which is why we inspect and photograph the crown before quoting. Call (833) 858-5823 for an exact quote; estimates are free.
Sometimes. A properly sized custom cap with the right flue coverage can improve draft on a tenement chimney where the original opening was never matched well, but draft problems can also trace back to an unlined or deteriorating clay tile flue. We camera-inspect first to find which one you have. Call (833) 858-5823 for an exact quote; estimates are free.
Ready to get that cap and crown sorted? Call (833) 858-5823 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The local pro is licensed and insured as their state requires, the sweep and inspection come with a camera check and photo report, and nothing gets recommended without evidence you can see for yourself.
Written by the team at Chimney Sweep Crown Heights.