Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Clinton Hill
If your Clinton Hill chimney crown is crumbling or your cap is missing, rain is already getting into the flue, and every freeze-thaw cycle makes the damage worse. We install, replace, repair, and coat caps and crowns for rowhouses and brownstones across Clinton Hill, from the blocks near the Pratt campus to the side streets off Myrtle Avenue and Fulton Street. Call (833) 858-5823 and we’ll book a sweep and send a technician out.
Why Clinton Hill Homeowners Call Chimney Sweep Crown Heights for Chimney Cap & Crown
Clinton Hill homeowners call us because we do chimney and fireplace work only. Every technician, every tool, and every material is chosen for flue environments, not borrowed from general contracting. You don’t have to hand one trade to a contractor who does ten. Our technicians have up to 10 years of experience, and they’ve worked the older rowhouse stock around Clinton Hill enough to know what a 19th-century multi-flue stack actually looks like once the cap comes off.
We’re straight with you about what’s evidence and what isn’t. Nothing gets recommended without camera footage of the flue and the crown you can see for yourself. That matters most on older Clinton Hill chimneys, where upselling is common and hard for a homeowner to fact-check. If a repair can safely wait, we tell you that instead. We can work with your insurer on storm-related damage, and the local pro performing the work is licensed and insured as their state requires. Call (833) 858-5823 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Clinton Hill
Our chimney cap & crown team covers the whole job in one visit. Cap installation, cap replacement, crown repair, crown coating, multi-flue caps, and custom caps. Below are the four most common requests.
Cap Installation in Clinton Hill
A properly sized stainless cap keeps rain, birds, and squirrels out of an open flue. On Clinton Hill rowhouses, the flue often hasn’t been capped in decades because the original top plate rusted away with nothing to replace it. We size the cap to the actual flue tile, not a stock guess, and secure it so it stays through winter weather.

Cap Replacement in Clinton Hill
When a cap is bent, rusted, or blown partly off, we pull it and install a correctly sized unit in its place. Clinton Hill homes with several flues on one stack often have a single cap that never covered them all, leaving a gap the original installer missed. We check that every flue is covered.

Crown Repair in Clinton Hill
The mortar crown at the top of a brick chimney is designed to shed water away from the flue. In Clinton Hill’s brownstones, original crowns are often cracked and no longer sloped correctly, so water pools and works into the brick. We rebuild or repair the crown to restore its slope and overhang, so it protects the stack again.

Crown Coating in Clinton Hill
A crown coating works only when the mortar underneath is sound. On Clinton Hill chimneys, we often find coatings applied over cracked mortar, and they fail within a season or two. We inspect the underlying mortar first, fix structural cracks, and coat only where the crown can hold it. That’s the difference between a coating that lasts and one that doesn’t.
Trusted Brands We Service in Clinton Hill
We work with professional-grade chimney products, including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those names come up naturally on cap and crown jobs: a custom multi-flue cap on a Clinton Hill brownstone is often a Gelco or Olympia model sized to the exact flue layout. HeatShield ceramic repair is what we use for flue resurfacing when the crown and cap are sound but the interior masonry has deteriorated and needs attention. We don’t stock parts on a truck; we order the right size for the job and schedule accordingly. Call (833) 858-5823 to get started.
Common Chimney Cap & Crown Problems We See in Clinton Hill Homes
- Cracked mortar crowns on original brick chimneys. The crown on a 19th-century Clinton Hill chimney often has hairline cracks from decades of New York’s humid summers and freezing winters, and water infiltrates through those cracks, spalling brick and staining interior plaster near the chimney breast.
- Missing or damaged caps on unlined or clay-tile flues. A missing cap lets in rain, animals, and debris, which accelerates creosote buildup and weakens draft, especially on flues converted to vent modern gas boilers without proper relining.
- Improperly sized caps on multi-flue stacks. A single undersized cap over a stack with three or four flues leaves gaps around the edges, so the cap does less than it looks like it’s doing.
- Coatings over cracked mortar that fail early. A crown coating put on top of deteriorated mortar without addressing the underlying cracks peels or cracks again within a season, and water keeps entering.
Pricing for Chimney Cap & Crown in Clinton Hill, NY
Cap and crown work in Clinton Hill runs in a fairly consistent range for this kind of housing stock. A standard cap installation typically runs $250 – $500. A custom or multi-flue cap sized to a multi-flue stack in a brownstone often runs $450 – $850, depending on the number of flues and whether stainless or copper is chosen. Crown repair, including rebuilding the slope and overhang, typically runs $400 – $1,200 depending on how much mortar needs to come off and rebuild. Crown coating alone is usually $300 – $600 if the underlying mortar is sound. These are estimates to help you plan; the written estimate you receive sets the final price. The estimate is free. Call (833) 858-5823.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Clinton Hill
We also work in Clinton Hill and the neighborhoods around it. If you’re just across the way, we cover Fort Greene, Prospect Heights, Williamsburg, and Park Slope for cap and crown work. Same standards, same camera-evidence approach, whichever block you’re on. Call (833) 858-5823.
Serving Clinton Hill, NY – Our Local Coverage Area
We serve Clinton Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Clinton Hill
Most crumbling crowns on Clinton Hill brownstones can be repaired, but the decision depends on how far the mortar has deteriorated. If the crown has hairline cracks and the slope is intact, a coating plus crack repair usually works. If the mortar is crumbling to the point where the crown no longer sheds water, a partial or full rebuild is usually the honest answer. We show you the camera footage and photos of the crown before recommending anything. Call (833) 858-5823 for a free estimate.
Caps blow off in Clinton Hill when they’re undersized, loosely attached, or set on cracked flue tiles that don’t hold the fasteners. A cap that was sized for a different flue, or attached with the wrong hardware, has nothing solid to grip. On multi-flue stacks, the right fix is usually a properly sized cap bolted to sound flue tiles, not another stock unit from a hardware store. We check the tile first. Call (833) 858-5823.
Not always, but each flue does need to be covered, and a single undersized cap on a multi-flue stack often leaves gaps that let rain and animals in. In Clinton Hill rowhouses, we usually find one cap on a stack that has three or four flues. The right approach is a custom multi-flue cap sized to the whole stack, or properly fitted individual caps if the tiles are spaced widely. We measure each flue before recommending anything. Call (833) 858-5823.
Water staining on the ceiling or plaster near the chimney breast, and spalling brick on the parapet, are the two most common signs that a cracked crown is letting water in. In Clinton Hill, the damage often starts at the crown and shows up inside the house weeks later. The mold smell or musty odor in a room near the chimney is another clue. A camera inspection of the crown and flue confirms it. Call (833) 858-5823 for a free estimate.
Crown repair rebuilds or patches the mortar crown itself, restoring its slope and overhang so it sheds water. Crown coating is a protective layer applied over a crown that’s still structurally sound, and it seals small surface cracks. In Clinton Hill, coatings often fail when they’re applied over deteriorated mortar without fixing the underlying cracks first. We inspect the crown before deciding which one your chimney actually needs. Call (833) 858-5823 for a free estimate.
What Makes Cap and Crown Work in Clinton Hill Different
Clinton Hill’s rowhouses and brownstones are packed with 19th-century chimneys that were built long before anyone worried about modern gas appliances. Many of these stacks started as coal or wood flues, then got repurposed for gas boilers and water heaters with no relining. The flues are unlined brick or original clay tile, frequently with offsets or breeching added during conversions. Cleaning and inspecting one of these means accounting for the original multi-flue design and the fact that the interior layout often matches nothing on a modern chimney diagram. That’s the work we’re built for.
The hidden-chimney problem is the one that surprises homeowners most. In the historic brownstones along Clinton Avenue and the side streets off Willoughby, flues frequently run behind original plaster walls with no cleanout at the base. That means a technician often has to create an access hatch or work entirely from the roof in a tight, parapet-lined areaway where staging a ladder is a puzzle. That’s why we inspect with a camera before we quote, and why we don’t guess at scope from the street.
A typical Clinton Hill cap and crown call starts with a homeowner noticing water staining on the ceiling near the chimney breast or spalling brick on the parapet. On inspection, the technician often finds a cracked mortar crown that no longer sheds water and a missing or rusted cap, letting rain into the flue where freeze-thaw cycles make the damage worse. The usual fix involves rebuilding or coating the crown to restore its slope and overhang, then installing a properly sized multi-flue cap (often a custom stainless unit from Gelco or Olympia) secured to the flue tiles. All of it is documented by camera so the homeowner sees the evidence before approving anything. No camera evidence, no recommendation.
Written by the team at Chimney Sweep Crown Heights.
Book Your Clinton Hill Chimney Cap & Crown Estimate
If your crown is cracked or your cap is gone, call (833) 858-5823 for a free estimate. We’ll book the sweep, bring a camera, and show you exactly what we see before recommending any repair. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.