Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Flatbush
If your Flatbush chimney is letting in water, drafting badly, or sitting under a crown that’s cracked and flaking, we can help. We’re a chimney and fireplace specialist working across Flatbush and the surrounding blocks, and cap and crown work is one of the things we know best. We work on the old brick stacks you find on the rowhouses and frame Victorians here every week, so we know what these chimneys look like from the roofline down. Call (833) 858-5823 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Flatbush Homeowners Call Chimney Sweep Crown Heights for Chimney Cap & Crown
Flatbush homeowners and landlords call us because we do one thing: chimney and fireplace work. Not gutters, not roofing, not general contracting. Every technician, every tool, and every material we bring is chosen for this trade, which matters when the chimney in question is a hundred-year-old brick stack that’s been modified more than once.
Our technicians have up to 10 years of experience, and inspection is built into how we work, not tacked on afterward. We won’t tell you a crown needs rebuilding or a liner needs replacing without camera footage and photos you can look at yourself. That’s the part that matters most in a neighborhood full of old chimneys where the temptation to sell unnecessary work is real.
Our Flatbush customers call us back because we show the evidence, explain what can safely wait, and put the price in writing before anything gets booked. That’s how we’ve built our reputation here, one honest inspection at a time.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Flatbush
Our chimney cap & crown work covers the top of the system, which is where most water damage in Flatbush starts. Here’s what we handle most often.
Cap Installation
A properly sized cap keeps rain, birds, and squirrels out of an open flue and helps with downdrafts. On Flatbush chimneys with two or three flues serving different appliances, the cap has to be matched to the actual flue count and dimensions, not guessed at. We measure before we order.

Cap Replacement
Storm-driven wind off the Atlantic has a way of lifting undersized or corroded caps, and once a cap is gone the flue is wide open. If your Flatbush cap is loose, rusted through, or missing entirely, replacement is usually the fastest fix on the whole chimney. We fit stainless and galvanized caps sized to your flues.

Crown Repair
The crown is the mortar top that slopes water away from the chimney. On century-old Flatbush brick crowns with little or no overhang, repeated freeze-thaw cycles crack and spall the mortar, and water tracks down into the smoke chamber and firebox. We repair or rebuild crowns to shed water properly. Any crown repair starts with a camera inspection, so we know whether the flue behind it is sound before we touch the top.

Crown Coating
When a crown is cracked but still structurally sound, a coating can seal it and buy years before a rebuild is needed. We use Gelco crown coating for this, applied over a properly prepped surface. When a coating is the right call rather than a rebuild, we’ll tell you, and we’ll show you why.
Trusted Brands We Service in Flatbush
We work with professional-grade materials from HeatShield, Gelco, Olympia Chimney, and Famco, the same lines certified chimney professionals use across the country. We don’t claim to stock parts locally or run a warehouse. What we do is order the right cap and crown materials for your specific flues and get the job done without sending you to a second contractor. If your cap needs a custom size, we measure it and order it, and we’ll give you a realistic timeline up front.
Common Chimney Cap & Crown Problems We See in Flatbush Homes
- Cracked and spalling brick crowns. Century-old crowns with no overhang crack after repeated freeze-thaw cycles and let water run straight down into the flue. Left alone, that moisture works its way into the smoke chamber and firebox.
- Storm-lifted or corroded caps. Nor’easter wind and rain off the Atlantic test mortar crowns and flashing, and an undersized or rusted cap can lift right off. An open flue admits rain, animals, and downdrafts.
- Gas appliances tapped into old parlor-stove flues. In Flatbush’s early-1900s Victorians and Edwardian rowhouses, flues that once served parlor stoves were later tapped by gas boilers and water heaters. That leaves orphaned or cross-connected stacks, and a new cap alone won’t fix the draft or the carbon monoxide risk.
- Buried interior chimney runs. Many of these homes were subdivided into multi-unit rentals, and later renovations walled over the interior chimney run. Without a camera, nobody can say what’s actually behind the brick.
Why Flatbush Chimneys Need Camera Evidence First
Flatbush has a specific problem that doesn’t show up in newer neighborhoods. The Victorians and Edwardian rowhouses here were built around 1900 with flues designed for parlor stoves. Over the decades, gas boilers and water heaters got vented into those same stacks, and some of them were cross-connected or left orphaned when a unit was converted. So a cap and crown job on a Flatbush roof often starts with a camera running down the flue to see what’s actually connected to what, rather than with a simple cap swap.
That’s also where the worst upselling in this trade happens. Someone gets on the roof, glances at the crown, and comes down with a quote for a full rebuild and a new liner. We don’t work that way. Nothing is recommended without camera evidence you can look at yourself, and we’ll tell you plainly when a repair can safely wait.
On a typical Flatbush block, a two- or three-story Victorian with an original brick chimney shows a spalling crown after a season of nor’easter wind and rain, and the homeowner calls after noticing water staining or a drafty smell. A qualified local pro runs a Level 2 inspection with a camera, confirms whether the flue liner is clay-tile or unlined and whether a gas boiler vent is cross-connected, then typically rebuilds or coats the crown to slope water away and fits a correctly sized multi-flue cap. The fix gets documented with photos so the landlord and tenants can both see what was actually failing before any work is approved.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Flatbush, NY
Here’s what this work typically runs in Flatbush. All of these are estimates, and the written estimate sets the final price after we’ve seen the chimney.
| Service | Typical Flatbush range |
|---|---|
| Cap installation (single flue) | $250 – $450 |
| Multi-flue cap | $450 – $900 |
| Custom cap | $700 – $1,400 |
| Crown repair | $500 – $1,000 |
| Crown rebuild | $900 – $1,800 |
| Crown coating | $250 – $500 |
What moves the number: how many flues the cap has to cover, whether the crown just needs a coating or a full rebuild, and how much the chimney access adds on a taller rowhouse. A multi-flue cap on a shared Flatbush stack costs more than a single-flue cap on a detached house. Estimates are free, and we don’t bill you to come look. Call (833) 858-5823 for an exact quote.
We Also Serve Cities Near Flatbush
We work across Kensington, East Flatbush, Flatlands, and Crown Heights, so if you’re just outside Flatbush we can usually fit you into the same schedule. The housing stock across these neighborhoods is closely related, which means the same camera-first approach applies. Call us and we’ll confirm coverage for your address.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Flatbush
Because in Flatbush the flue behind the crown is often not what the roofline suggests. Many of these early-1900s chimneys had parlor-stove flues later tapped by gas boilers and water heaters, so a camera is the only way to confirm whether the liner is clay-tile or unlined and whether any vent is cross-connected. A cap and crown decision made without that evidence can put money into the wrong fix and leave a real draft or carbon monoxide risk in place. Call (833) 858-5823 to book an inspection. Estimates are free.
It’s usually a maintenance item that becomes a structural problem if you leave it. A cracked crown lets water track down into the smoke chamber and firebox, and over a few freeze-thaw cycles that moisture damages the brick and mortar below. The camera tells us how far the damage has gone. Call (833) 858-5823 and we’ll tell you whether a coating will hold it or a rebuild is the right call.
In most Flatbush multi-family buildings the chimney is shared infrastructure, so the landlord and the tenants both need to be in the loop. We document the inspection with photos so everyone can see what’s actually failing, and the written estimate goes to whoever authorizes the work. Getting that agreement in writing before work starts saves a lot of back-and-forth later. Call (833) 858-5823 and we’ll walk you through what the inspection covers.
You can’t tell from the outside, and often not from the firebox. Third-degree creosote is a glazed, hardened layer that a standard brush won’t touch, and it’s a real chimney fire risk. A camera inspection is the only way to know for sure. If we find it, we’ll show you the footage and explain the removal options before anything gets booked. Call (833) 858-5823 for a free estimate.
A multi-flue cap is a standard manufactured cap sized to cover several flues on one stack, and it handles most Flatbush chimneys. A custom cap is fabricated to fit an irregular crown, an unusual flue arrangement, or a chimney shape that stock sizes don’t match. We measure the chimney before we order either one, so you’re not paying for a cap that doesn’t fit. Call (833) 858-5823 and we’ll tell you which one your chimney needs.
Ready to Protect Your Flatbush Chimney?
A cracked crown or a missing cap is one of the cheapest chimney repairs to make and one of the most expensive to skip. Water gets in, freeze-thaw does its work, and the damage moves down the flue. We’ll get on the roof, run a camera, show you the evidence, and give you a flat-price estimate before anything gets booked. Call (833) 858-5823 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The local pro we connect you with is licensed and insured as the state requires.
Written by the team at Chimney Sweep Crown Heights.