Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Kensington, NY
We provide independent HeatShield service across Kensington, and the one thing that shapes our work here is the housing: attached pre-war rowhouses where a single chimney stack serves more than one home. HeatShield is a flue resurfacing product, and it performs best when the brick and clay behind it are sound. In Kensington’s century-old stacks, that’s rarely a given. Our technicians have up to 10 years of experience and treat every HeatShield job as an inspection first. Call (833) 858-5823 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Kensington Residents Choose Us for HeatShield Service
HeatShield work rewards familiarity. The product is unforgiving of a flue that hasn’t been properly prepared, and in a rowhouse block two or three doors deep, that preparation matters more than the product itself. We know HeatShield as a repair material, sized and specified against the actual flue condition we find on the day, not a manufacturer’s line we’re pushing.
That independence is the point. Because we’re not affiliated with or authorized by HeatShield, we can tell you plainly when a HeatShield reline is the right fix and when clay flue reconditioning or a partial rebuild makes more sense. We’ve seen both calls go wrong in Kensington when someone skipped the inspection step.
Scheduling is straightforward. We book a window, we show up, and the written estimate sets the price before any work begins. No surprise line items.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Kensington
The HeatShield failures we see in Kensington tend to trace back to the same local pressures: aging clay, movement between attached walls, and moisture that never quite dries out.
- Delaminating cast-in-place liners behind shifted clay tile. In attached Kensington rowhouses, party-wall movement is routine. When the clay tile behind a HeatShield-style cast-in-place liner shifts, the liner cracks or separates from the flue wall, and the gap grows with every cold snap.
- Liner-to-crown separation after freeze-thaw cycling. Kensington’s cold winters and humid summers push exposed brick crowns through repeated freeze-thaw. When the crown cracks, water runs behind the liner and shows up as damp staining on a ceiling two doors away.
- Blocked or crushed liner sections in original clay flues. Many Kensington flues were sized for solid fuel and never properly matched to a modern gas boiler or water heater. An undersized or crushed section produces draft problems and, in the worst case, carbon monoxide spillage.
- Soot and debris bridging where a flue was converted to gas. When an old flue switches from solid fuel to gas venting without a proper Level 2 inspection, soot and debris can bridge inside the existing liner and choke the draft.
- Crown and flashing leaks that travel along shared stacks. A cracked crown on one Kensington chimney often lets water track into a neighbor’s party-wall stack, so the leak you notice may not have started on your side of the wall.
HeatShield Service in Kensington: What Local Conditions Mean for Your Equipment
Drive through Kensington’s 11218 blocks and you’ll see it everywhere: tightly attached brick rowhouses and two- and three-family buildings, most with original clay tile flues tied to gas and boiler venting rather than wood-burning fireplaces. That layout changes what HeatShield service means. A failing crown or flashing leak on one chimney routinely surfaces as damp staining two or three doors down, so a proper sweep here almost always includes inspecting the shared party-wall stacks and neighboring flues, not just the one fireplace. HeatShield is designed to resurface a flue, but it can’t fix a crown that’s letting water in behind it. For HeatShield owners in Kensington, the work starts with the brick and the crown, then moves inward to the flue itself.
HeatShield Models & Products We Service in Kensington
We service the full range of HeatShield flue repair products: cast-in-place mixes like Thermo-Mix and Thermo-Crete, the CeCure-S and standard resurfacing kits used for clay-flue relining, stainless-steel liner systems with insulation wrap, and HeatShield crown and flue repair products.
For anything structural, we source genuine HeatShield components: the cast-in-place mix, liner sections and top plates. For straightforward cap and damper items, quality aftermarket stainless is often the right choice. The distinction matters in Kensington’s century-old stacks. A HeatShield reline is frequently the correct repair, but a spalled or shifted clay flue still needs repointing or a partial rebuild first, or the new liner fails on the same schedule as the old one.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Kensington
HeatShield-related pricing in Kensington depends on the flue, not a flat rate. A cast-in-place reline, a liner section replacement, and a crown-and-flashing repair sit at different price points because the prep work differs. We don’t quote from a menu. The free estimate includes a Level 2 inspection with camera documentation, so you see the condition of your flue before you decide.

- Level 2 inspection with camera and photo report: included in the estimate
- Crown repair and flashing re-sealing: priced per job
- Chimney waterproofing: priced per job
- HeatShield reline or partial liner repair: priced per job after inspection
Call (833) 858-5823 for an exact quote. Estimates are free, and the written estimate sets the final price.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Kensington
No. We’re an independent HeatShield service provider, not manufacturer-affiliated or authorized. That independence means we recommend HeatShield when it’s the right material for your flue, and we’ll tell you when it isn’t.
Because the shared party-wall stack carries water between attached homes. A cracked crown or failed flashing on one Kensington chimney lets water travel along the brick, and it often surfaces as damp staining two or three doors away before anyone notices the source. A proper inspection follows the moisture path, not just your fireplace.
Not always. It depends on the condition of the clay and whether the flue is properly sized for your boiler. A Level 2 inspection tells you which it is. If the clay is sound, reconditioning may be enough; if it’s spalled or shifted, a HeatShield reline is usually the better long-term fix. Call (833) 858-5823 for an exact quote. Estimates are free.
It opens the joint between the liner and the crown. Kensington’s cold winters and humid summers cycle the exposed brick crown, and when it cracks, water gets behind the liner. That’s why we treat crown repair and waterproofing as part of the HeatShield job, not a separate line item.
Yes, but the party-wall condition has to be assessed first. Shared stacks behave differently from standalone chimneys, and movement on one side affects the flue on the other. A Level 2 inspection on both sides is the standard starting point in Kensington before any reline is scheduled.
A Level 1 covers the readily accessible parts of the system; a Level 2 adds camera inspection of the flue interior and is what you need before any HeatShield work or after a flue conversion. For Kensington rowhouses with gas boiler venting, Level 2 is usually the right call. Call (833) 858-5823 to book one.
Service Areas Near Kensington
We also work in Crown Heights, East Flatbush, Williamsburg, Prospect Heights, and Bedford-Stuyvesant, plus Flatbush and Flatlands for HeatShield relining and repair. Our Kensington coverage includes the attached rowhouse blocks where shared stacks need the most careful inspection.
Book Your HeatShield Service in Kensington Today
If you own a Kensington rowhouse with an aging flue or a HeatShield liner you’ve never had inspected, we can help. Call (833) 858-5823 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. To learn more about our HeatShield expertise, see HeatShield, and for the Flatbush area see Flatbush or Flatlands.
Written by the team at Chimney Sweep Crown Heights.