Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Park Slope?
Chimney cleaning in Park Slope typically costs $175 to $390 for a standard sweep, and most single-flue homes land around $225 to $275. That price includes a basic safety check of the firebox and visible flue, which is the part most homeowners forget to ask about. Add $100 to $175 if you want a written Level 2 inspection with photos alongside the cleaning, and expect $450 to $900 or more if the sweep turns up cracked masonry or a failing liner that needs repair.
Those numbers are for the Park Slope market in 2026, and they assume a chimney that’s been serviced at some point in the last couple of years. A chimney that hasn’t been touched in a decade is a different job, and we price it that way. Call (833) 858-5823 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the work breaks down by line item for a Park Slope home. These are typical ranges, not fixed prices, and the written estimate you get after we look at your chimney sets the final number.
| Service | Typical Range | What It Covers |
|---|---|---|
| Standard chimney sweep (one flue) | $175 – $390 | Brushing and vacuuming the flue, firebox clean-out, visual check of the damper and smoke chamber |
| Level 1 inspection (with a sweep) | $100 – $175 add-on | Readily accessible portions of the chimney, plus a written report of what we found |
| Level 2 inspection (camera) | $275 – $550 | Video scan of the full flue interior, often needed after a chimney fire or before a liner install |
| Second flue or second fireplace | $90 – $160 per additional flue | Most Park Slope rowhouses run two flues for the main fireplace and a second appliance |
| Creosote removal (heavy, glazed) | $300 – $650 | Stage 3 glazed creosote that won’t brush out and needs chemical treatment before it can be swept |
| Chimney cap installation | $180 – $420 | Stainless or copper cap sized to the flue, which keeps rain and animals out of an open chimney |
| Crown repair or rebuild | $350 – $1,100 | Cracked crown sealing or full recast, common on older masonry chimneys in this neighborhood |
| HeatShield flue resurfacing | $900 – $2,400 | Ceramic resurfacing for a deteriorating masonry flue that isn’t ready for a full reline |
| DuraFlex liner installation | $1,800 – $4,500 | Flexible stainless liner for a chimney that’s no longer safe to use as-is |
What usually pushes a Park Slope cleaning toward the higher end is the building itself. The neighborhood is full of 1890s to 1930s rowhouses and brownstones with original brick chimneys, and many of those flues were built for coal, then converted to wood, then sometimes to gas. A flue that’s served three different fuels over a century holds a different kind of buildup than a flue in a newer house. We’ve seen offset flues that a standard brush can’t follow cleanly, and we’ve seen parging that crumbled the moment the brush touched it. Both mean more time on the roof and more careful work inside the flue.
Where the price comes down is simplicity. One flue, one fuel, serviced within the last few years, with easy roof access from a flat brownstone roof or a clean straight run from the firebox. Those jobs are quick.
What Affects Chimney Cleaning Pricing in Park Slope
- Flue count. A single brownstone fireplace is one price. A rowhouse with a main fireplace flue plus a second flue for a boiler or wood stove is more, because each flue gets cleaned and checked separately. Most of the housing stock here has two.
- Creosote stage. Stage 1 creosote is soot that brushes away easily. Stage 2 is flaky and crusted. Stage 3 is glazed, tar-like, and won’t come off with a brush no matter how hard we push. That last one needs chemical treatment before it can be swept, and that’s the single biggest cost swing in chimney cleaning. It’s also the stage worth avoiding, since glazed creosote in the flue is one of the main fuel sources in a chimney fire.
- Masonry condition. Brick spalling, crumbling mortar crowns, and missing flue tile are everywhere on chimneys of this era. If a cleaning uncovers a cracked crown or a gap in the flue tiles, the estimate will include repair options, because a sweep on a compromised flue is a partial job. HeatShield ceramic resurfacing handles a lot of that deterioration without a full reline, which is one reason we keep it on hand.
- Roof access and height. A flat brownstone roof with a low chimney is fast to work from. A pitched roof, a high parapet, or a chimney tucked behind a dormer takes longer and occasionally requires ladders and staging that add to the job. Winter ice and steep snow-covered roofs slow things further.
- Fuel type. Wood-burning fireplaces leave the most creosote and need the most thorough cleaning. Gas fireplaces produce far less buildup but still need the flue and venting checked, along with the logs and connections. Multi-fuel setups get priced per appliance, not per chimney.
- How long since the last cleaning. This is the quiet cost driver. A flue serviced two years ago cleans up in under an hour. A flue that hasn’t been swept since before the current owners moved in is a bigger job, and the first sweep often uncovers the damage that a regular schedule would have caught early and cheaply.
One local reality worth naming: the heating season here is long. Park Slope fireplaces get used from October into April, and a wood fire burns hottest and dirtiest in December and January. That means creosote accumulates fast, and the longer it sits the harder it sets. Cleaning in early fall, before the first fire of the season, keeps you ahead of the buildup instead of chasing it.
How to Save on Chimney Cleaning
There’s no version of this where a cheap sweep on a neglected flue saves money. The real savings come from staying ahead of the damage. A few practical things we tell homeowners:
- Book before the rush. Fall is when everyone remembers their fireplace, and scheduling in late summer or early fall gives you a calmer appointment and more room in the schedule if the sweep finds something that needs repair.
- Clean the flue and inspect it in one visit. Pairing a Level 1 inspection with the sweep is far cheaper than booking them separately, and it’s the combination that actually tells you whether the chimney is safe to use. A cleaning without a look inside is guesswork.
- Fix the cap before the flue pays for it. A cap is a small cost. Water coming down an open flue rots the chimney from the inside, damages the smoke chamber, and eventually calls for resurfacing or a liner. A $180 to $420 cap is a cheap way to protect a $2,000 liner.
- Address the crown early. A cracked crown lets water into the masonry and freezes and thaws its way through the winter. Sealing a small crack is affordable. Rebuilding the top of the chimney after years of freeze-thaw damage is not.
- Burn dry wood. Seasoned, dry hardwood produces less creosote than green wood or softwood. It’s the cheapest upgrade available to you and it directly cuts how often the flue needs the heavy work.
We give free estimates, so there’s no cost to finding out what your chimney actually needs. Call (833) 858-5823 and we’ll talk through what you’re seeing before anyone goes on the roof.
Level 1 vs. Level 2 Inspection: Which Do You Actually Need?
A Level 1 inspection comes with most standard cleanings and covers what we can see and reach without special tools. A Level 2 adds a video camera run down the full flue and is what you want after a chimney fire, after a new appliance is installed, when you’re buying a home, or any time the flue can’t be seen from the firebox. For a Park Slope brownstone with an offset flue, the camera is often the only way to know what’s going on back there. We work to NFPA 211 Level 1 and Level 2 standards on every inspection, and we’ll tell you plainly which one your chimney calls for instead of upselling the bigger one by default.
Can I Just Skip the Cleaning This Year?
You can, but the math rarely works. Creosote is the fuel in a chimney fire, and each season of use adds another layer. A sweep every year or two keeps the buildup in the range where it brushes out quickly and cheaply. Skip four or five seasons and you’re looking at hardened creosote removal, and possibly damage to the flue tiles that costs more than several cleanings put together. Fire safety starts at the flue, and the flue is much easier to maintain than to rebuild.
Why Work With a Chimney Specialist
A chimney is a small system with a lot going on: the flue, the firebox, the damper, the smoke chamber, the crown, the cap, and the flashing where it meets the roof. A general handyman can brush a flue and hand you a bill. That’s not the same as knowing what the flue looked like on the way down, whether the smoke chamber needs parging, and whether the cap is sized right for your flue. Chimney sweep crown heights built our service around the full system for that reason: sweep, inspect, repair, and upgrade with one specialist who’s accountable for the whole thing.
That means we work only in this trade. Our technicians have up to 10 years of experience, every tool we carry is built for flue work, and our materials come from a professional roster: DuraFlex flexible liners, HeatShield ceramic resurfacing, and products from Gelco, Olympia Chimney, Famco, and Copperfield. The same lines used by certified chimney professionals across the country. HeatShield and DuraFlex are engineered specifically for the inside of a chimney, which matters when the alternative is improvising a repair that has to hold up to heat and creosote for years. We also handle caps, crowns, firebox and damper repair in-house, so a single call covers the cleaning and the fix. The local pro connecting you is state-licensed and insured as their state requires, and every estimate is written and free.
What Happens When You Call
You call, we ask about the chimney, the fuel, and when it was last serviced, and we book a visit. On the appointment, we protect the floor and fireplace surround, sweep the flue and firebox, remove the soot in sealed bags, and check the damper and smoke chamber as we go. If anything looks off inside the flue, we tell you before we leave and put options in writing. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday.
FAQs – Chimney Cleaning Cost
How much does a chimney sweep cost in Park Slope?
A standard chimney sweep in Park Slope runs $175 to $390, with most single-flue homes at $225 to $275. The written estimate sets the final price after we see the flue. Call (833) 858-5823 for an exact quote. Estimates are free.
Is it cheaper to repair or replace my chimney flue?
Repair is usually cheaper when the damage is limited. HeatShield resurfacing runs $900 to $2,400 and can rescue a deteriorating masonry flue, while a full DuraFlex reline costs $1,800 to $4,500 and is the right call when the flue tiles are cracked or missing. The inspection decides which one you need. Call (833) 858-5823 and we’ll lay out both options in writing.
How often should I have my Park Slope chimney cleaned?
Once a year if you burn wood regularly, and every two years at minimum for occasional use. Gas fireplaces still need an annual check. Buildup happens fast during the long heating season in Park Slope, and a yearly visit keeps the cost in the low range instead of the repair range. Call (833) 858-5823 to book.
Can you come today?
Often, yes. We offer same-day service when the schedule allows. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 858-5823.
Does a chimney cleaning include an inspection?
A basic inspection comes with every cleaning, and a Level 1 report is a $100 to $175 add-on if you want it in writing with photos. A camera-based Level 2 is $275 to $550 and is worth it after a chimney fire or a fuel change. Call (833) 858-5823 for a free estimate on either.
Get a Free Chimney Cleaning Estimate in Park Slope
If your chimney hasn’t been checked this season, or you’re not sure when it last was, that’s exactly the right time to call. We give written, upfront estimates on every job, with no service-call fee, and our technicians know these brownstone chimneys the way you’d expect a specialist to. Call (833) 858-5823. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday.
Pricing reflects the Park Slope market as of 2026. Chimney Sweep Crown Heights offers free estimates. Call (833) 858-5823.
Written by the team at Chimney Sweep Crown Heights.
What Our Customers Say
"He was about 40 minutes late but he did call ahead to tell me, which I appreciate more than being left guessing. Work was clean and he answered all my questions before he left."
- Andre Carter"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Angela Wong"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Jennifer Doyle